Machine screws are one of the more widely used products among dozens of standard fastener types. They can be either coarse-threaded or fine-threaded, and are usually available with a wide range of head types. Usually stronger than many other screw types, they are used for fastening metal parts and panels securely together in a range of construction and other applications including aerospace, machinery, vehicles, engines, tool assemblies, electronic devices, and large-scale industrial equipment. 

Sourced from quality producers,  machine screws are offered as part of our own branded (AVIATIONEU NEW ERA) product lines conforming to aerospace/military or industrial standards/specifications.  They come in different sizes, head types, materials and thread gradings. Countersunk screws allow the head of the screw to sit flush with or below the surface of the surrounding material. They may also be used to remove the burr left from a drilling or tapping operation thereby improving the finish of the product and removing any hazardous sharp edges.

AVIATIONEU NEW ERA MS35206 and MS35207 series of machine (non structural) screws are mil spec pan head cross recessed (Phillips) screws, manufactured from carbon steel and are cadmium plated to specification QQ-P-416, Type 2, Class 3. MS35206 series machine screws feature 60,000 psi min. tensile strength and can be used as replacements for AN526 truss head & AN515 round head screws. MS35207 series machine screws are fine threaded have a minimum tensile strength of 55,000 psi and replace the AN507R series. Both MS35206 and MS35207 series machine screws are offered in different diameters, thread sizes and lengths in inches and they are sold in pieces. For more information, please refer to the individual product presentations, the supplied documentation or contact us.

AN365 self locking nuts are intended for use in structural applications where the regular height is required. AN365 nuts have been repaced by MS21044 which in turn are superseded by NASM21044. These precision-made nuts are reliable and economical fastening devices. The fiber insert gives a friction grip on the threads of the bolt and holds securely. Fabricated from cadmium plated or stainless steel when the letter "C" is included after the series number (e.g. AN365 cadmium plated, AN365C stainless steel). Cad plated nuts are furnished to military specifications while stainless steel nuts are furnished to military specification and commercial grade.  The Part Identification Number (PIN) for MS21044 and the part number for NASM21044 nuts are identical. The part numbers have not been changed. Sourced from quality producers, NASM21044/MS21044/AN365 series nuts are offered as part of our AVIATIONEU NEW ERA product lines.

ATI 110C series flush straight drive rivets with rubber guard are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Shank diameter 0.401".  Different sizes are available serve specification requirements for face diameters and lengths.

A hydraulic wiper or scraper prevents contamination of the hydraulic medium that could damage wear rings, seals and other components. They are installed in sealing configurations in hydraulic cylinders to scrape dirt, foreign particles, chips or moisture from the rod of a hydraulic cylinder as it retracts into the hydraulic system.

TRELLEBORG offers a wide range of hydraulic scrapers and wipers in metal, elastomer, Turcon® Polytetrafluoroethylene (PTFE) based material or Zurcon® polyurethane. These include the Turcon® Excluder®, which is the Trelleborg proprietary design of double-acting hydraulic scraper. Specially engineered for hydraulic cylinder applications, Turcon® and Zurcon® materials demonstrate excellent low-friction properties providing exceptional resistance to wear.

TRELLEBORG Turcon® and Zurcon® Excluders are offered in Metric or Inch versions, in different sizes either as sets with matching o-rings or without o-rings. Appearing prices of Turcon® and Zurcon® Excluders relate to sets of scrapers and o-rings unless otherwise specified. Please refer to the description of individual products for additional information and the attached Part Number Guide for Aerospace applications.

These AVIATIONEU NEW ERA hexagon locking nuts comform with ASTM A194 standard specification for carbon, alloy and stainless steel nuts used in high pressure, temperature or other special-purpose applications. They can be indicatively used in the process industries, such as petroleum and chemicals for pressure vessels, valves, flanges, and fittings. Sourced by certified manufacturers these nuts are competitively priced and offered in metric (M3 - M36 diameter) or inch (3/16" - 1.1/2") sizes, different thread types and grade range to meet respective design, service conditions, mechanical properties, and high temperature requirements. Please refer to ASTM A194  specification table for additional information. Sold in packs of 100 pcs each.  Appearing price is for reference only per pack. Please contact us for a quotation.

Anchor nuts (aka nut plates) are designed for blind mounted applications where it is impractical to use hex nuts. Sourced from quality manufacturers, a range of nut plates comlying with different Military Specifications are offered as part of AVIATIONEU NEW ERA product lines. They come in Unified thread sizes (*), Standard and Miniature versions, different types (fixed or floating, one lug, two lugs, corner, etc.) and various materials & finishes to meet application requirements. For more information and specifications of different MS series nut plates please refer to individual product presentations. Respective Non Military (Commercial) anchor nuts, meeting DIN, ISO and other standards, both in Metric (M3 - M12 diameters) and Unified thread types are also available from AVIATIONEU NEW ERA product portfolio. All AVIATIONEU NEW ERA anchor nuts are competitively priced and are cost effective alternatives to the respective OEM parts. They are sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time.Please refer to product specifications or contact us.

(*) There is currently no military specification for Metric nut plates.

DZUS Lion Quarter-Turn Fasteners from SOUTHCO are versatile space-saving fasteners designed to secure panels quickly and easily. They are offered in 81/82/85 series in 0.5 mm (.02") stud length increments to provide a precise fit for accurate positioning of panels and sheet metal applications where dimensions are constant. There are different receptacle styles for use with these fasteners including:

Floating for Riveting without Base - space saving stainless steel receptacle offering optimum weight savings by eliminating base.

Floating for Riveting with Base - Compact full-floating dacrotized steel receptacle mounted to inside panel with two 3/32" rivets.

Clip-On Receptacles - Fit material thickness from .020 to .190 b simply slipping over the hole and clipping in place. Easily removed not requiring welding and riveting.

Rubber Vibration Isolation Receptacles- for use when necessary to isolate vibration between panels.

For additional information please refer to the attached documentation.

The NAS1022 Series nuts are low height and strength hexagon machine nuts available in different materials and finishes. Those from 450 Deg. low strength steel are designated by the letter "A" after NAS1022. Similarly, the letter "C" designates nuts from corrosion resisting steel passivated while the letter "N" refers to steel cad plated nuts. They are offered as part of our own branded (AVIATIONEU NEW ERA) product lines in different thread sizes and dimensions in inches.

A plate nut, also known as a nut plate, anchor nut or anchor plate, is a stamped sheet metal nut that is usually riveted to a workpiece. They have a long tube that is internally threaded and a plate with two clearance holes for rivets. These terms are used interchangeably throughout product presentations to describe respective products.

Floating nut plates are low profile and lightweight plates used to install a captive nut behind a panel. The floating nut allows for an assembly that is not perfectly aligned. These lightweight, low-profile nut plates are designed for blind mounted applications where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. 

F5000 Series floating  two-lug anchor nuts (nut plates) by HOWMET AEROSPACE (ARCONIC) are made of C1050 carbon Steel per AMS5085 (UNS G10500) or 8740 alloy steel per AMS6322 (UNS G87400). Their basket is made from  C1050 carbon steel per AMS5085 (UNS G10500).

Thread profile is UNJ inch in accordance with SAE Aerospace Standard AS8879.They are offered in the following finishes:

F5000 - Cadmium plate per AMS-QQ-P-416, Type II, Class 2 plus Kaylube molybdenum disulfide dry film lubricant per AS5272, Type I.

F5000X - Cadmium plate per AMS-QQ-P-416, Type II, Class 2.

F5000-CW - Cadmium plate per AMS-QQ-P-416, Type II, Class 2 and carbowax.

They are superseded by NASM21059 series.

Certification Details:

MS21059J, MILITARY SPECIFICATION SHEET: Nut, Self-Locking, Plate, Two Lug, Floating, Low Height Steel, 125 KSI FTU, 450 Deg. F (01 Feb 1994) [Superseded by NASM21059].

F5001 Series HOWMET AEROSPACE (ARCONIC) floating  two-lug anchor nuts are made of A286 corrosion resistant steel per AMS 5255, or AMS 5732. Thread profile is UNJ inch in accordance with SAE Aerospace Standard AS8879. Nut is finished with Kaylube molybdenum disulfide dry lubricant coat per AS5272, Type I. Basket is either passivated per AMS2700 or Kaylube finished. Other features include:

PERFORMANCE: NASM25027

FLOATABILITY: .030 min. radially from centered position.

TEMPERATURE: 450°F

VARIATIONS:

"P" for bottom projection weld nibs. Example: F5001-4P.

"BC" for bottom countersunk rivet holes. Example: F5001-4BC.

F5000 and F5001 Series anchor nuts  are sold in pieces or in packs where the number of nuts per pack is indicated after the letters "PK" in the product SKU.

NAS6603 series shear hexagon head bolts have a 10-32 thread and a nominal grip diameter of 0.1900 inch. NAS6603 series forms part of NAS family of bolts (NAS6603 through NAS6610 series) which includes hex head, close tolerance, alloy steel, long thread, self-locking & non-locking bolts. Their shearing feature is used to minimize damage to more critical components within the application. They are made from alloy steel with cadmium or chromium finishes and offered  in different grips and lengths in inches with undrilled or drilled head and/or shank. Used in applications where a premium-quality, high strength bolt is necessary. The following letters after the basic part numbers specify the material, finish and drilling condition of these bolts.

No Finish Code for cadmium plated bolts

"C" for chromium plated bolts

"D" for drilled shank bolts

"L" for self-locking bolts

"P" for self-locking bolt with patch type locking element

"H"for bolts with drilled head

More than one code letters may be used in sequence.

POP® PRG510A/MCS510A series air rivet guns are strong, compact, and trouble-free pneumatic tools ideal for continuous high-production riveting. Αvailable with either a deflector (PRG) or with a Mandrel Collection System (MCS). The PRG-511 A offers an extended nose housing for improved access. Sets aluminum in sizes 3/32″ – 3/16″ in open-end and closed-end POP rivets.

AVERY TOOLS (*) manufactures and supplies gauges for shop rivet heads and rivet lengths.

AVERY TOOLS rivet head gauges are offered as a set of four gauges for -3, -4, -5, & -6 rivets. Each gauge measures MINIMUM height and MINIMUM diameter of shop heads AFTER setting. Eliminates guessing if your rivets are properly set. Works for measuring both universal head and flush rivets. Precision machined to size from 2024 aluminum. Rivet size permanently stamped on each gauge. Color coded anodized finish.

A rivet length gauge is also available to check for proper length of rivets BEFORE setting and can be ordered separately or as kit with the head gauges. 

(*) AVERY TOOLS aviation tools and products are now available only through retail suppliers.

ATI® 501 series aerospace heavy duty rivet cutters are designed to quickly and easily shear aluminum rivets. They are adjustable for 1/4˝ to 3/4˝ long rivets in 1/16˝ increments. Available in two models with standard handle (ATI 501R) and long handle (ATI 501S).

Sourced from quality manufacturers and offered as part of AVIATIONEU NEW ERA product lines, MS21047 Series Anchor Nuts (Nut Plates) (*) are fixed self locking elastic insert 2-lug nut plates made of cadmium plated steel with nylon insert and plain rivet holes. They come in different Unified thread sizes to meet application requirements and replace respective AN366F series nut plates. Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

A retaining ring is a fastener that holds components or assemblies onto a shaft or in a housing/bore when installed in a groove. Once installed, the exposed portion acts as a shoulder which retains the specific component or assembly. MS16624 series are external retaining rings intended for use in different shaft sizes. They are offered in different materials (Carbon Spring Steel, Corrosion Resistant Steel, Beryllium Copper) and surface finishes (Cadmium Plated, Phosphate Coat, Zinc Coat) depending on their part number and are axially assembled.

These washers are for use in Textron Lycoming aircraft engines. Supplied with our own Certificate of Conformance. If additional certification is required, please contact us as a respective charge may apply.

AN hex head bolts in different series are offered under AVIATIONEU NEW ERA product series. Sourced from quality vendors, these bolts are manufactured to the US Army-Navy (AN) standard, predecessor to Mil-Spec (MS), superseded by the National Aerospace Standard (NAS). Commonly used in aviation for either tensile/shear load applications. Made from high-strength type 4037 or 8740 alloy steel or 431 Stainless Steel (CRES) and cadmium plated for superior corrosion resistance (compared to commercial grade zinc plated bolts) they are offered with shank drilled for cotter pin or undrilled for stop nut application, and with a drilled head for safety wire or without. Minimum Tensile Strength (Steel and CRES) - 125,000psi. The length of AN aircraft bolts is measured from under the head to the end of the shank. The "grip" is the unthreaded portion of the shank. Threads are pressed into the steel, not cut, thus maintaining strength throughout the entire shank. The surface under the head of AN bolts is designed to be a bearing surface to reduce non-uniform stress as the bolt is torqued thus reducing premature fatigue. The following letters are used in the product part  numbers.

"A" after the dash number for bolts with undrilled shank

"C"  for bolts made of 431 Stainless Steel (CRES)

"H" after the AN number for bolts with drilled head (eg. AN8H-15)

 AN3 through AN20 Series bolts are superseded by NASM3 through 20 Series. The part numbers in both series have not been changed. 

Specification Details:

AN3 through AN20 (REV. 12), Military Specification Sheet: Bolt -Machine, Aircraft [superseded by NASM3 through 20]. This specification covers aircraft machine bolts part numbers, AN3, AN4, AN5, AN6, AN7, AN8, AN9, AN10, AN14, AN16, AN17, AN18, and AN20. AN3 THRU AN20  is canceled and superseded by NASM3 THRU NASM20. The Part Identification Number (PIN) for AN3 THRU AN20 REV. 12 and the part number for NASM3 THRU NASM20 are identical. The part numbers have not been changed.

NAS561 series pins are heavy duty slotted spring pins made from high carbon cadmium plated steel, stainless steel, austenitic (nickel) or stainless steel, martensitic (chrome). Offered in different diameters and lengths.

Machine screws are one of the more widely used products among dozens of standard fastener types. They can be either coarse-threaded or fine-threaded, and are usually available with a wide range of head types. Usually stronger than many other screw types, they are used for fastening metal parts and panels securely together in a range of construction and other applications including aerospace, machinery, vehicles, engines, tool assemblies, electronic devices, and large-scale industrial equipment. 

Sourced from quality producers,  machine screws are offered as part of our own branded (AVIATIONEU NEW ERA) product lines conforming to aerospace/military or industrial standards/specifications.  They come in different sizes, head types, materials and thread gradings. Countersunk screws allow the head of the screw to sit flush with or below the surface of the surrounding material. They may also be used to remove the burr left from a drilling or tapping operation thereby improving the finish of the product and removing any hazardous sharp edges.

AVIATIONEU NEW ERA AN503 series of machine (non structural) screws are aeronautical standard coarse thread slotted fillister drilled head screws meeting MIL-S-6050 specifications. They are manufactured from steel and cadmium plated to specification Type I Class 3. These screws feature 125,000 psi tensile strength, they are offered in different sizes in inches and they are sold in pieces. For more information, please refer to the supplied documentation or contact us.

Sourced from quality manufacturers and offered as part of AVIATIONEU NEW ERA product lines, MS21078 Series Nut Plates are are fixed self locking 2-lug nut plates with elastic insert and plain rivet holes (*). Made from cadmium plated steel 

 they are available in different Unified thread sizes and replace respective AN366F series nut plates. Competitively priced, these anchor nuts are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners.