ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different screws, such as hexagonal, allen, fixation and others are used in BRP-ROTAX® aircraft engines (please refer to the respective product presentations). They come in various sizes (mostly Metric) and are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

MGL AVIONICS is a manufacturer of advanced electronic flight instrument systems for experimental and light sport aircraft including EFIS and engine monitoring systems and radios.

MGL AVIONICS precision temperature sender (probe) is based on a brass housing with an 1/8” NPT thread suitable for Rotax water/oil cooled and Jabiru engines.

This probe is electrically isolated from the engine which is helpful in some installations Accurate with a maximum installed error reading of less than 2 degrees over the full temperature range. Recommended for applications were exact water and/or oil temperature readings are required.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Fuel pressure gauges are used in BRP-ROTAX® aircraft engines and offered as certified or non certified parts from their respective manufacturers. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation.

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

Fuel pressure gauges are no longer offered as ROTAX Part Numbers. These part numbers are provided for reference only. For these gauges please refer to our product presentation on AVIASPORT Fuel Pressure Gauges or contact us.

The FLYdat has been specially developed by TL ELEKTRONIC for BRP-ROTAX® Aircraft Engines for indicating and storing of engine operation data. The unit  is furnished with 8 sensor input ports, which can be occupied variably according to engine type.

The operating data is permanently compared with the engine specific operating limit. If the signalled operating data exceeds the stored operating limit, the FLYdat will warn the pilot. In addition all the input ports are equipped with a maximum alarm, responding when picked-up value is equal or above the stored limit. The FLYdat keeps the pilot informed on the following actual readings. Besides the topical data, the FLYdat shows also the hours of operation.

•  Engine speed

•  Cylinder head temperature (CHT)

•  Exhaust gas temperature (EGT)

•  Ambient air temperature (not on engines 912 / 914)

•  Temperature of cooling water (only on engines 582 UL, 618 UL)

•  Oil temperature and oil pressure (only on engines 912 / 914)

The TL ELEKTRONIC FLYdat is supplied with a standard configuration. With the standard configuration all trigger levels for warning- and alarm system are set to the maximum of the measuring range.

Configuration is available for the following BRP-ROTAX® engine types: 447 UL SCDI, 503 UL DCDI, 582 UL DCDI, 618 UL DCDI, 912 DCDI series, 914 DCDI series, Standard

By configuration of the TL ELEKTRONIC FLYdat, the engine type, engine number, hour of operation, temperature unit and the respective engine limits are programmed.

The TL ELEKTRONIC FLYdat unit and parts are no longer offered as ROTAX Part Numbers. These part numbers are provided for reference only.  In addition, aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the engine manufacturer for the correct part number before ordering.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different hoses for water, heat, air intake, protection, form, connecting, low pressure and others & related fittings are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU). ROTAX engine hoses are generally sold in meters and appearing prices are per meter but some hoses of specific dimensions and fittings are sold in pieces.

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Revolution Counters (Tachometers)/HOBBS meters are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from BRP-ROTAX® but also from other manufacturers.  Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different wire harnesses are parts intended for use in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different cylinder heads and cylinder head assemblies are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft. They form part of  BRP-Powertrain GmbH & Co. KG product portfolio which also includes engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles & carts.

The BRP-ROTAX® 916 iS series are turbo charged four cylinder aircraft engines with best power-to-weight ratio and TBO 2,000h. This series includes non-certified (916 iSA)  and EASA CS-E certified models (916 iScA) and also models for 24V power aircraft supply systems (non-certified 916 iSA C24 and EASA CS-E certified 916 iScA C24).

916 iS Series Engine Features:

Four-stroke piston engine with four liquid and air-cooled cylinders

Redundant electronic fuel injection and ignition, eco mode

Turbocharger, stainless steel exhaust

Dry sump forced lubrication with separate oil tank, automatic adjustment by hydraulic valve tappets

Engine management system (EMS)

Electric starter (12 or 24 Volt)

Propeller speed reduction gearbox

Intercooler

TBO 2,000 hrs

Maximum operating altitude 23,000 feet

Full take-off power up to 15,000 feet

Available Options (supplied with the engine):

air guide baffle installed

2 electrical fuel pumps

silicon water hoses

NOTE: Options are additionally charged and must be specified at the time of ordering. They can only be ordered with the respective engine(s).

For additional information please refer to the supplied documentation.

ROTAX® aircraft engines form part of the product portfolio of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts. BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

The BRP-ROTAX® 912 UL/912 ULS series aircraft engines are four cylinder/four stroke non certified engines suitable for experimental and ultralight aircraft. Different models include 912 UL, 912 UL 3, 912 UL S2 as well as  and 912 UL S3 (UL 3/UL S3 models are for constant speed propeller). The BRP-ROTAX® 912 UL 3 engine is the same as 912 UL engine additionally with drive for hydraulic governor & cover for sealing of governor flange and slipper clutch for reduction gearbox. The BRP-ROTAX® 912 UL S3 engine is the same as  912 UL S2 engine additionally with drive for hydraulic governor & cover for sealing of governor flange. 

Different options are also available at additional cost. They can only be ordered at the time of ordering of the respective engine(s). 

For additional information please refer to the supplied documentation.

The AVIASPORT indicators (gauges) are reliable, accurate and solid, combining the accumulated experience of more than twenty years with the latest technology  They have been designed for ROTAX engines and their display areas are divided into red, green and yellow zones in line with Rotax limits. They use a pointer that turns 240º or 320º, providing high resolution. AVIASPORT range of gauges includes CHT, EGT, tachometers, oil and fuel pressure, oil and coolant temperature, fuel level, voltmeters & ammeters and offered with casings of different sizes: 80mm; 57mm and 52mm.

AVIASPORT Oil Pressure indicators (gauges) are designed specifically for ROTAX 912/914 aircraft engines with painted red, green, and yellow gauge markings. are available in two sizes: 52 and 57 mm. They are offered in two unit versions for readings in PSI or Bars. They work with different pressure sensors depending on these installed in ROTAX 912/914 engines: the VDO sensor (Before September 2008) or the 4..20mA sensor (after 2008).

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft. They form part of  BRP-Powertrain GmbH & Co. KG product portfolio which also includes engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles & carts.

The BRP-ROTAX® 915 iS series are turbo charged four cylinder aircraft engines offered in non-certified (915 iSA)  and EASA CS-E certified models (915 iScA). These engines are also offered for 24V power aircraft supply systems. The respective models are  915 iSA C24  (non-certified) and 915 iScA C24 (EASA CS-E certified). These engines are suitable for aircraft equipped with a constant speed propeller or a fixed pitch propeller.

Different options are also available and can be supplied with the engine at additional cost.  They can only be ordered at the time of ordering of the respective engine(s). For additional information please refer to the supplied documentation.

915 iS Series Engine Features:

Performance: 99 kw at 5500 1/min, 104 kw at 5800 1/min (max. 5 min)

four cylinder engine

liquid cooled cylinder heads, air cooled cylinders

integrated reduction gearbox i = 2,54 (915 iSA /915 iScA)

integrated reduction gearbox i = 2,54, version 2 or 3 (915 iSA C24/915 iScA C24)

slipper clutch for reduction gearbox

electric starter + starter relay

engine control unit (ECU)

double elecrtonic system with two voltage regulators

double electronic fuel injection system

turbocharger with electronic controlled wastegate

expansion tank 922668

stainless steel exhaust system

oil filter, oil tank, without tubes

airbox

engine truss assembly (Assy) without silent block

intercooler

aircraft power supply 24V/800W (915 iSA C24/915 iScA C24)

Available Options (supplied with the engine):

air guide baffle installed

2 electrical fuel pumps

silicon water hoses

starter 24V

NOTE: Options are additionally charged and must be specified at the time of ordering. They can only be ordered with the respective engine(s).

Range of special accessories by FRANZ AIRCRAFT ENGINES for use in BRP-ROTAX® aircraft engines and other applications.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft. They form part of BRP-Powertrain GmbH & Co. KG product portfolio which also includes engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles & carts. 

The BRP-ROTAX® 914 F series aircraft engines are turbo charged four cylinder engines (115 hp) certified according to FAR-33 and JAR-E . A non certified model (914 UL) is also offered (please refer to the respective product presentation).

With a time between overhauls of 2.000 hrs these engines offer more performance at high altitudes while keeping weight at a low level. The BRP-ROTAX® model 914 F2 is suitable for aircraft equipped with a fixed pitch propeller while the model 914 F3 for constant speed propeller is the same as 914 F2  with additionally a drive for hydraulic governor, a cover for sealing of governor flange and a slipper clutch for reduction gear box. Different options are also available and can be supplied with the engine at additional cost.  They can only be ordered at the time of ordering of the respective engine(s).

914 F2/F3 Engine Features:

Performance: 73,5 kw at 5500 1/min, 84,5 kw at 5800 1/min (max. 5 min)

Four cylinder engine

Liquid cooled cylinder heads,aircooled cylinders

Turbocharger

2.000 hrs TBO

integrated reduction gearbox i = 2,43

slipper clutch for reduction gearbox

electric starter standard + starter relay

electronic dual ignition system

ignition cover

R.F.I. suppression

regulator rectifier 965347

2 carburetors

turbocharger with electronic controlled wastegate

2 external electric 12V fuel pumps 996738

engine truss Assembly (ASSY) without silent block

stainless steel exhaust system

expansion tank 922666

oil filter, oil tank,without hoses

coolant pump and internal coolant hoses

2 sensors for cylinder head temperature 965531

1 sensor for oil temperature

1 oil pressure sensor 10 bar

airbox with drip tray set

without propeller cover disc and round neck nut set

drive for hydraulic governor (Model 914 F3)

cover for sealing of governor flange (Model 914 F3)

slipper clutch for reduction gear box (Model 914 F3)

Available Options (supplied with the engine):

drive vacuum pump

electric starter large (HD- high duty)

mechanical tachometer pick-up

NOTE: Options are additionally charged and must be specified at the time of ordering. They can only be ordered with the respective engine(s).

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Main jets are carburetor parts intended for use in BRP-ROTAX® aircraft engines. They come in different sizes and offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different vacuum pumps are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. The RAPCO FAA/PMA'd vacuum pump, RA215CC  is used in ROTAX® 912 UL, 912 ULS and 914 UL engines. Please refer to the separate product presentation for RAPCO Dry Air Pumps for vacuum or pressure system applications.

Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different spacers are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different screws, such as hexagonal, allen, fixation and others are used in BRP-ROTAX® aircraft engines (please refer to the respective product presentations). They come in various sizes (mostly Metric) and are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft. They form part of  BRP-Powertrain GmbH & Co. KG product portfolio which also includes engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles & carts.

The BRP-ROTAX®  914 UL Series Aircraft Engines are non certified  turbo charged four cylinder engines. Certified models of this engine (914 F2  and 914 F3) are also offered (please refer to the respective 914 F Series product presentation).

ROTAX 914 UL Series are intended for use in ultralight and experimental aircraft. Engine model 914 UL2 is suitable for aircraft equipped with a fixed pitch propeller and it is offered with or without slipper clutch installed. Engine model 914 UL3  is the same as 914 UL2  with additionally a drive for hydraulic governor, a cover for sealing of governor flange and a slipper clutch for reduction gear box. 

Different options are also available at additional cost. They can only be ordered at the time of ordering of the respective engine(s). 

914 UL Series Engine Features:

Performance: 73,5 kw a 5500 1/min, 84,5 kw a 5800 1/min (max 5 min.)

Four cylinder engine

liquid cooled cylinder heads, aircooled cylinders

integrated reduction gearbox i = 2,43

electric starter standard + starter relay

electronic dual ignition system

ignition cover

R.F.I. suppression

regulator rectifier 965349

2 carburetors

turbocharger with electronic controlled wastegate

2 external electric 12V fuel pump 996 738

engine truss assembly (Assy) without silent block

stainless steel exhaust system

expansion tank 922666

oil filter, oil tank,without hoses

coolant pump and internal coolant hoses

2 sensor for cylinder head temperature 965531

1 sensor for oil temperature

1 oil pressure sensor 10 bar

airbox with drip tray set

without propeller cover disc and round neck nut set

drive for hydraulic governor (Model 914 UL3)

cover for sealing of governor flange (Model 914 UL3)

slipper clutch for reduction gear box (Model 914 UL3)

Available Options (supplied with the engine):

drive vacuum pump

electric starter large (HD- high duty)

mechanical tachometer pick-up

NOTE: Options are additionally charged and must be specified at the time of ordering. They can only be ordered with the respective engine(s). For pricing of options and overhaul kits please refer to those listed under 914 F Engine Series.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different alternators are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.