List of products by brand CHAMPION AEROSPACE

Aviation products for turbine and piston engines

Aviation products for turbine and piston engines

Active filters

CHAMPION AEROSPACE Approved...

Slick magnetos by CHAMPION AEROSPACE are used on nearly all aircraft piston engines. They are OEM approved for more than 225,000 aviation engines and exhibit distinct design and operational features such as smaller and lighter design, radio noise suppression, lift-off housing and easy maintenance. 

The following CHAMPION AEROSPACE approved lubricants are offered for use in the mainenance and overhaul of these magnetos to ensure their long service life.

R5008 Magneto Bushing Oil

EXXONMOBIL® Mobil TERESSTIC 100 Series oil. TERESSTIC is the brand name for a line of long-service-life lubricating oils. They are formulated with carefully selected base stocks and highly effective additives, including oxidation and rust inhibitors and anti-foam agents.

The TERESSTIC line of circulating oils consists of nine viscosity grades. Eight of these grades are blended to viscosity values that conform to the International Organization for Standardization (ISO) viscosity classification system.

Uses: Distributor block and gear assembly Oilite bearings. 

M1827 Rotor Cam Grease

Proprietary liquid lubricant developed through Boeing manufacturing operations and lubricant experience.

Always consult CHAMPION AEROSPACE manuals for the proper use of these lubricants.

For additional information please refer to the supplied documentation.

CHAMPION Aviation Engine...

Champion Aerospace designs and manufactures Champion-brand piston-engine ignition components for both OEM and aftermarket for general aviation aircraft applications. Every Champion spark plug manufactured has built-in design advantages that assure longer life and greater reliability. They are manufactured within all military and commercial standards established for aviation spark plugs. All plug types are designed to meet specific engine and aircraft requirements for thread size, reach, heat rating, shielding and terminal connection.

Champion Aerospace Spark Plug Part Number with symbol explanation:

1. Resistor None--No Resistor     R--Mil-Spec. Resistor-Erosion protection

2. Barrel Style None -- Unshielded     E -- Shielded 5/8"-24 Thread     H -- Shielded 3/4"-20 Thread (All Weather Plug)

3. Mounting Thread -- Reach -- Hex Size     B-18mm 13/16" / 2.06cm 7/8" / 2.22cm     M--18mm 1/2"/1.27cm 7/8"/2.22cm     L-14mm 1/2"/1.27cm 13/16/2.06cm U­18mm 1-1/8"/2.85cm 13/16/2.06cm     J -- 14mm 3/8"/0.95cm 13/16/2.06cm

4. Heat Rating Position Low number--cold     High number--hot

5. Electrode Design None-Conventional single     E -- Two prong massive     N -- 4 prong massive     W -- Fine wire (Iridium)     B --2 prong massive, Tangent to Center     P--Fine wire (Platinum)

CHAMPION AEROSPACE FAA/PMA...

CHAMPION AEROSPACE designs and manufactures CHAMPION-brand filters and piston-engine ignition components for both OEM and aftermarket for general aviation aircraft applications.

CHAMPION FAA/PMA Approved Spin-On Oil Filters replace oil filter elements. They are easy to install and save time and clean-up.

Their full-pleat, resin-impregnated micronic filter media traps all harmful particles, including metallic chips which result from abnormal engine wear. Because the oil flows through many layers of locked-in fibers, there is no migration of fiber material to clog engine oil passages or affect bearing surfaces. According to industry-approved tests, the CHAMPION oil filters trap and hold more dirt and harmful particles during their normal operating time than any other similar filters. 

Product Features:

Replacement elements service engine-mounted or line-installed filter systems incorporating a permanent housing assembly.

All sizes of replacement elements are packed 12 per case of a single part number in heavy, re-shippable corrugated-board cartons

Modern spin-on oil filters contain the element, incorporating the anti-drain back valve mechanism (and internal bypass valve 48108-1/48109-1), and are sealed in a disposable housing.

All sizes of spin-on filters are packed 12 per case of a single part number in heavy, re-shippable corrugated-board cartons.

Silicone impregnated filter gasket aids in future removal.

Shorter stud length on CH 48110-1 for tight clearance applications.

Heavy, corrugated steel center tube supports each convoluted pleat of the filter element and produces a substantially higher collapse-pressure rating, twice that of other similar filters.

Maximum full-flow design, without interference from center-bolt oil filter assemblies, provides increased oil filtration each engine-operating hour.

Sold each or in packs of 12 filters per pack.