Splits the signal from a single NAV antenna into two NAV receivers and one glide slope receiver.

The AV-534 is a TSO'd heavy-duty stainless steel bent whip VHF communications antenna with porcelain insulators and mounting hardware. The AV-534L is same antenna as AV-534 but furnished with 96" lead of RG58 A/U cable with male BNC and ground strap with lugs.

The AV-525 is a VOR/LOC/GS antenna similar in style to the AV-12 but utilizes an internal balun transformer. The antenna is rated at speeds up to 350 mph and altitudes up to 50,000 feet. It is a direct replacement for the CI 157P.

Product Specifications:

Model: AV-525

Application: VOR/LOC/GS Receive Only

Frequency: 108-118 MHz (VOR/LOC) -328-336 MHz (GS)

Impedance: 50 Ohms Nominal

VSWR: 3.0:1 Maximum 108-118 MHz - 2.0:1 Maximum 329-335 MHz

Polarization: Horizontal

Pattern: Omni-Directional

Connector: “BNC” Female

Max. Weight: 0.50 lbs.

Certification: FAA TSO C34e, C36e, C40c

The AV-532 is a VOR/LOC/GS receive only antenna which consists of taper ground high-strength 17-7PH stainless steel elements to reliably withstand vibration and wind loads. The insulators are weather-sealed compression-molded bakelite with the mounting holes provided. The unit may be mounted with the V pointed either forward or aft. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 3.42 lb @ 250 mph.

RAMI AV-300 Antenna is a passive three frequency (121.5, 243 & 406 MHz) fiberglass rod antenna for use with an ELT (Emergency Locator Transmitter) in low speed general aviation aircraft (up to 350 knots).

Product Specifications:

Application: Airbone ELT

Frequency: 121.5, 243 & 406 MHz

Impedance: 50 ohms nominal

VSWR: 2.0:1 max at 121.5 MHz,2.0:1 max at 243 MHz, 1.5:1 Max. at 406 MHz

Polarization: Vertical

Pattern: Omni-Directional

RF Power Capacity: 10 Watts CW

Connector: BNC Female

Max Weight: 9 oz max

Max Height: 14.00 inches max

RAMI AV-200 Antenna is a passive two frequency (121.5 & 406 MHz) whip antenna for use with a 406 MHz ELT (Emergency Locator Transmitter) in low speed general aviation aircraft (up to 250 knots). It has met DO-160G, Section 8, Category U requirements for robust vibration and is qualified for installation on helicopters with unknown related rotor frequencies.

Product Specifications:

Application: Airbone ELT

Frequency: 121.5, 406 MHz

Impedance: 50 ohms nominal

VSWR: 2.0:1 Max at 121.5 MHz, 1.5:1 Max. at 406 MHz

Polarization: Vertical

Pattern: Omni-Directional

RF Power Capacity: 10 Watts CW

Connector: BNC Female

Max Weight: 0.19 lbs.

Max Height: 24″

FAA TSO C126a

RAMI AV-100 Antenna is intended for use with an ELT (Emergency Locator Transmitter) for general aviation. It has a passive two frequency (121.5 & 406 MHz) wire whip, designed for low speed aircraft (up to 250 knots).

Product Specifications:

Application: Airborne ELT

Frequency: 121.5 MHz, 406 MHz

Impedance: 50 Ohms Nominal

VSWR:

121.5 MHz 2.0:1 Maximum

406 MHz 1.5:1 Maximum

Polarization: Vertical

Pattern: Omni-Directional

Connector: "BNC" Female

Weight: 3 oz. Maximum

FAA TSO: C126a

Color: Black

The R.A. MILLER (RAMI) TSO'd AV-74 (.425 Stud Length) & the AV-74-1 (.800 Stud Length) are broadband blade type antennas for transponders or DME applications. The antenna housing is constructed of an acrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antennas are supplied with cellular neoprene mounting pad and hardware. Designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. They have a drag force of 0.09 lbs @ 250 mph. These antennas are direct replacements for the CI-105 antennas.

Product Specifications:

Application: Transponder/DME

Frequency: 960 - 1220 MHz

Impedance: 50 Ohms Nominal

VSWR: 1.5:1 Maximum

Polarization: Vertical

Pattern: Omni-Directional

Connector: "BNC" Female

Max Height: 3.4"

RF Power Capacity: 2.5 kW Peak

FAA TSO: C66c, C74c

The RAMI AV-10 COMM Antenna is designed for high-performance aircraft applications. It exhibits excellent electrical characteristics and incorporates an efficient aerodynamic 4-bolt mounting base. The antenna essentially matches the styling of the communication antennas currently used on most singles and light twins. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 2.70 lb @ 250 mph.

Product Specifications:

Application: Airborne Communications

Frequency: 118 to 137 MHz

Impedance: 50 Ohms Nominal

VSWR: 2.0 to 1 Maximum

Polarization: Vertical

Pattern: Omni-Directional

Connector: Type "BNC" Female

Max Weight: 8 oz

Max Height: 20-1/4"

RF Power Capacity: 25 Watts