EASA Certified VHF transceiver 57mm with 6W output power. Automatic selection of 8.33kHz/25kHz spacing and OLED display.

The ICOM IC-A220 Series of VHF Air Band 760 COMM transceivers operating in 118-136.975MHz range are offered as non certified (IC-A220) or certified (IC-A220T) versions. The IC-A220  is a popular fit with experimental and light sport aircraft. The TSO/ETSO approved IC-A220T will work for all certified aircraft and it comes as a standard unit complete with install kit and mounting tray (IC-A220T), adapted unit IC-A220T-K with edge connector MBA-3 (*) fitted as a replacement for King KY96A/97A, KY196A/197A (**), Icom A200 or A210,and adapted unit IC-A220T-G with D-Sub connector MB113 as a replacement for Garmin SL40 (***). 

Both IC-A220 and IC-A220T radios support  8.33 kHz and 25 kHz frequency spacings and feature OLED display, 20 memory channels and 20 history memory channels, "flip-flop" arrow button switches between main and stand-by channels, 8W output power, a built-in 2 station intercom, 12 or 24 volt compatibility and automatic squelch. They can be used for radio upgrades and replacecements of  KY96A/KY97A & SL40 radios. 

(*) The MBA-3 is intended for use with the Non-TSO'd model (IC-A220). Use with the TSO'd model (IC-A220T) may void the TSO.

(**) The adapted unit will not directly replace King KY96, KY97, KY196 or KY197 units.

(***) Metal work modification is required as the locking mechanism for the IC-A220T is in a different position on the SL40 tray/rack.

The HONEYWELL BENDIX KING® KMT 112 is a Magnetic Azimuth Transmitter (aka Flux Detector or  Valve) which senses the direction of the earth’s magnetic field and continuously transmits this information through the slaving circuitry to a directional gyro (such as the HONEYWELL BENDIX KING® KG 102A or KSG 105 slaved directional gyros). This sensor is mounted remotely, usually in a wingtip, to eliminate the possibility of magnetic interference. The KMT 112 is typically used in HONEYWELL BENDIX KING® KCS 55A and KCS 305 compass systems. The KMT-112 flux valve is a sealed unit and cannot be serviced or have parts replaced. The unit must be replaced when/if it fails.

Like other KCS 55A compass system components, the  KMT 112 transmitter can be furnished in NEW condition or as USED in Serviceable or Overhauled conditions indicated respectively by the letters "SV" and "OH" in the product reference numbers (SKU and  accompanied by the relevant certification (e.g. yellow tag, 8130-3 form). They are also offered as exchanges / trade-ins  for returned customer owned units indicated by the letter "EX" in the SKU.  In the case of an exchange/trade-in option of a customer unit, the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders when our co-operating supplier verifies that the unit is in a reasonable, repairable condition. It is recommended that this option is selected by our customers mainly for upgrades and only in cases when their units are functioning properly at the time removal from the aircraft. In cases when customer units are found by our supplier to be non-repairable, the core deposit shall not be refunded and shipping charges shall apply if customers wish the return of these units to them. 

Installation parts and manuals are sold separately. 

For additional information and technical specifications please refer to the Product Desscription section, the product presentation of the HONEYWELL BENDIX KING® KCS 55A compass system or contact us.

UMA  2-1/4" electric tachometers with their high resolution and easy to read displays were designed to offer aviation styling and performance for all types of aircraft. The analog model has a 270° sweep which provides great resolution in both the 3500 and 7000 ranges. The digital model has a bright LED display. Separate power source required. Installation is simple and instructions are included. They can replace mechanical tachometers in Lycoming/Continental engines.

Current: 80 milliamps ­ Size: 2.25" round x 2.75"deep.

PS ENGINEERING has revolutionized audio control in general aviation airplanes. At that time, the original PMA6000 took the audio panel from a collection of switches added as an afterthought, to a multitalented intersystem focal point for cockpit audio.

Radio selection, cockpit communications and even music were seamlessly combined in the modern audio control panel. The PMA6000-series set a benchmark for all GA audio panels that followed.

The next generation PMA6000B benefits from PS Engineering's long experience of audio panel control design and manufacturing experiences. It is an excellent low cost audio panel alternative to the higher end systems that PS Engineering has become so famous for. 

The PMA6000B combines an audio selector panel with a top-quality manually adjusted 4 place VOX mono intercom and a slew of features to enhance versatility and utility. The PMA6000B holds both FAA TSO as well as EASA ETSO and was designed to be made easier to install because of a single 44-pin Sub-d connector. Different PMA6000B models offered with or without marker beacon receiver.

Product Features:

Built-in 4 place mono intercom PS Engineering's ""Set-it and Forget-it"" manual VOX

Optional built-in marker beacon receiver

Split mode for dual audio capability

2 - Com Capability

3 - Intercom isolation modes - Pilot Isolate, All, and Crew

2 - Music inputs with Soft Mute™

2 - Unswitched inputs

6 - Switched inputs

A patented ""swap"" function allows selection of Com 1 or Com 2 from remote pushbutton

Fail-safe feature automatically hard-wires the pilot to Com1 in the case of an outage

Single 44-pin connector making installation easier

Certification: FAA TSO/EASA ETSO

Warranty: 24 months

Manufactured with high quality PC/ABS, the AERA 660 Panel Dock by AIRGIZMOS, maximizes its use by placing the GPS right in the aircraft  panel and hold securely in place without blocking any other instruments.  It makes GPS touch screen controls easier to navigate and matches the look and feel of the rest of the avionics stack, resulting in a pleasant, professional looking panel. Dimensions are 6.25" wide by 4.25" high.

Garmin has reduced the number of connectors on the AERA 660  by using a docking connector. This docking connector has been integrated in the design and nests into the back of AIRGIZMOS Panel Dock. For upgrades from an older Garmin GPS, this panel dock has been designed to fit the same opening as those for AERA 496 or 500 and uses the same hole layout for mounting.

SCINTEX complete kit with digital gauge and dual flow meters enabling monitoring of the engine's supply and return lines. It comes with 2 fittings for each flow meter (to be specified at the time of ordering) and clamps. For installation wiring between the flow meters and the display unit is required (not included). This kit is intended for use in vehicles, machinery, generators and boats / marine and other engine applications. The flow meters are precision cut from steel and aluminum and they are highly accurate, repeatable and suitable for use with diesel, biodiesel, unleaded petrol and other fuels. The display unit is a 1.8”, high resolution, sunlight readable, wide viewing angle, LCD colour display with a completely sealed and waterproof display front panel. The gauge enclosure is a common 52mm round size to fit many existing cutouts. Key features include highly accurate with good repeatability displays consumption in Litres per Hour or other units, fuel remaining in up to 2 tanks, connection capabilities to a NMEA enabled RS232 GPS receiver,  one or two fuel flow senders and fuel level senders and a single fuel pressure sender and display. It can be powered by 12V - 36V power supplies. Please refer to the additional information and specifications provided or contact us.

JPI FS-450 Fuel Scan is a top choice low price unit for fuel management of an aircraft, offeredin different versions with single transducer available for gravity, pressure and ROTAX engines or with a Flow Scan 201 or 231 transducer and harness for pressurized carb engines.

UNITED INSTRUMENTS 8000/8100 Series Air Speed Indicators (ASI) are FAA TSO'd for installation on certified aircraft. 

The 8000 Series ASI indicate the speed relative to the air at sea level altitude. The 8100 Series True ASI indicate the speed relative to the air at sea level or the desired altitude.The indicator has an inner dial to indicate true airspeed. The altitude and temperature are the conversion factors used to obtain this reading with the use of a setting knob. 

When properly connected to an airspeed tube, the 8000/8100 Series airspeed indicators measure the differential pressure developed between the pitot and static opening. 

The pressure is indicated in units of airspeed mph (M) and/or knots (K).

Product Specifications:

Certification: FAA TSO C2b 

Case Configuration: MS33638, 3 inch

Typical Weight: 0.7 pounds

Static, Pitot Pressure Connector:   1/8-27 ANPT

Installation: Removable spring nuts and #6-32 screws

Lighting: Available upon request. All lighted instruments require a light tray sold separately. Please refer to offered SIGMA-TEK 5000B 14V or 28V Light Tray.

Electric 12V Fuel Quantity Sender 10-180 Ohm for Mitchell Fuel Quantity Gauge D1-211-5074. For 24V operation, order P/N PE-111-4074 Resistors for each instrument.

Mitchell Electric 12V Fuel Quantity Gauge D1-211-5074 is lighted and easily installed in a 2-1/4" panel hole. It features a 2 year factory warranty.

Matching Sender: PS-211-8038 10-180 Ohm

The gauges and senders must be ordered separately.

For 24V operation, order P/N PE-111-4074 Resistors for each instrument.

The AVIASPORT indicators (gauges) are reliable, accurate and solid, combining the accumulated experience of more than twenty years with the latest technology  They have been designed for ROTAX engines and their display areas are divided into red, green and yellow zones in line with Rotax limits. They use a pointer that turns 240º or 320º, providing high resolution. AVIASPORT range of gauges includes CHT, EGT, tachometers, oil and fuel pressure, oil and coolant temperature, fuel level, voltmeters & ammeters and offered with casings of different sizes: 80mm; 57mm and 52mm.

The AVIASPORT fuel pressure gauges  have been designed especially to measure fuel pressure in Rotax® engines 912 and work both with 12V and 24V systems. Unlike mechanical gauges, the AVIASPORT ielectronic gauges use a high precision sensor to be installed close to the engine, preventing fuel lines in the cockpit. These gauges are sold without sending units or as kits with matching senders whenever specified.

The AV-532 is a VOR/LOC/GS receive only antenna which consists of taper ground high-strength 17-7PH stainless steel elements to reliably withstand vibration and wind loads. The insulators are weather-sealed compression-molded bakelite with the mounting holes provided. The unit may be mounted with the V pointed either forward or aft. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 3.42 lb @ 250 mph.

VDO Fuel Level Gauges have always been known for the superb fit, finish, and appearance, as well as the wide range of styles VDO offers. VDO Fuel Level 10-180 ohm Gauges  are offered in 2" and 2-1/4'" diameters with matching Fuel Level Senders  (aka sensors or probes) for their operation. This 12/24 VDC Fuel Level Sender has a resistance rating of 10 ohms when the tank is empty and 180 ohms when full. The unit can be adjusted to read accurately in tanks from 6" to 23" deep. In the case of the 2" 33-240 ohm Fuel Gauge, the appropriate fuel sender is P/N 226-007.  

VDO product range also include Standard Tubular Level sensors mounted direct into the tank with different tube diameters and lengths from 200 mm to 650 mm and different resistances. They feature:

- Resistance output

- Compatibility to the VDO gauges 301-010-00X and X10-110-981-009  (adjustable to 60 to 90 Ohm at empty).

- M4 bolt and hexagon nut or 6,3 x 0,8 mm spade terminal

- Optional ground connector

- Optional warning contact

- Mounting bolt circle 54 mm dip tube fuel senders with different tube diameters and lengths.

For additional information please consult the supplied documentation or contact us.

GARMIN® GA 35 GPS WAAS is a FAA TSO'd antenna suitable for use with Garmin GPS devices like the GTN 650 GPS/NAV/COMM/MFD. Antenna connection is female TNC out. For installation of this GPS antenna the use of  RG 400 or RG 142  and a male RG400/142 TNC connector is recommended. The mounting plate for this antenna is sold separately.

This line of FAA PMA'd  miniature engine gauges from Mitchell is ideal for a wide variety of general aviation applications. They measure nearly 1-1/2 inches square and are stackable. The modular design allows them to be plugged from the front of the panel. The units are internally lighted. Complete standard panels are also available.

FAA Approved. If individual gauges are ordered, appropriate backplate with pigtail must be ordered to mount and connect the gauge. If more than one gauge ordered to be mounted together, a special order cluster that requires custom backplates.