The FLYdat has been specially developed by TL ELEKTRONIC for BRP-ROTAX® Aircraft Engines for indicating and storing of engine operation data. The unit  is furnished with 8 sensor input ports, which can be occupied variably according to engine type.

The operating data is permanently compared with the engine specific operating limit. If the signalled operating data exceeds the stored operating limit, the FLYdat will warn the pilot. In addition all the input ports are equipped with a maximum alarm, responding when picked-up value is equal or above the stored limit. The FLYdat keeps the pilot informed on the following actual readings. Besides the topical data, the FLYdat shows also the hours of operation.

•  Engine speed

•  Cylinder head temperature (CHT)

•  Exhaust gas temperature (EGT)

•  Ambient air temperature (not on engines 912 / 914)

•  Temperature of cooling water (only on engines 582 UL, 618 UL)

•  Oil temperature and oil pressure (only on engines 912 / 914)

The TL ELEKTRONIC FLYdat is supplied with a standard configuration. With the standard configuration all trigger levels for warning- and alarm system are set to the maximum of the measuring range.

Configuration is available for the following BRP-ROTAX® engine types: 447 UL SCDI, 503 UL DCDI, 582 UL DCDI, 618 UL DCDI, 912 DCDI series, 914 DCDI series, Standard

By configuration of the TL ELEKTRONIC FLYdat, the engine type, engine number, hour of operation, temperature unit and the respective engine limits are programmed.

The TL ELEKTRONIC FLYdat unit and parts are no longer offered as ROTAX Part Numbers. These part numbers are provided for reference only.  In addition, aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the engine manufacturer for the correct part number before ordering.

AN5771-4A style 2-1/4 inch hydraulic pressure gauge with steel case connecting directly to the aircraft's hydraulic system. Fits in a 2-1/4" dia. panel opening and has a threaded 1/4"  connection for a fitting. Range: 0-2000 PSI. Only available in Overhauled Condition. Certified with fresh Matte-white dial. Yellow-tagged. Limited availability.

For new design projects and applications please refer to the presentations of alternative TSO'd and non TSO'd electronic hydraulic pressure gauges and pressure senders offered. 

Pressure Transducers (Senders) whenever required, ARE NOT INCLUDED in the prices of hydraulic pressure gauges. They are sold separately.

Note: A yellow tag is similar to a FAA 8130-3 Serviceable tag both denoting the "Serviceable" condition of the product i.e. it has been  repaired as needed, tested according to the manufacturer's procedure, meet the manufacturer's performance specifications and ready to return to service. Yellow tags are issued and widely accepted in North America while a FAA 8130-3 Serviceable tag is is accepted worldwide. The acceptance of yellow tags by national Civil Aviation Authorities should be checked by potential buyers prior to ordering.

The ICOM A25 series are powerful air band handheld transceivers offered in communications only (A25C) or NAV/COM versions (A25N) with 6 watts of power and an IP57 waterproof rating. They include a large 2350mAh Li-ion battery, providing a long operating time. The easy-to-use interface and large 2.3-inch LCD display combine to provide stress-free programming and in-flight operation. Built-in Bluetooth®, GPS and VOR navigation. ICOM A25 transceivers come with Antenna, Belt Clip, Handstrap, Battery Case, Battery Pack, Headset Adapter, Power Adapter and Battery Charger.

FALCON GAUGE Magnetic Compasses are non certified  2" compasses available in liquid (MCDN) and non-liquid (dry) types (MCVC). The Liquid Type compasses provide an accurate reading at a low cost. They are fluid damped and incorporate a thermal expansion chamber and compensating magnet. Available in Panel or Pedestal Mount versions with or without lighting. Different models available: MCDN-2, MCDS-2, MCDN-2L, MCDS-2L. They can be ordered for Northern or Southern Hemisphere.

These compasses are very similar to the Airpath C2300 & C2400 style compasses, but are priced more economically.

The FALCON GAUGE Vertical Card Compasses are of a non-liquid type.  They are designed with a different concept which eliminates the disadvantages experienced with a liquid compass, namely leaking and back and forth motion of the compass card.  These compasses look like directional gyros and offer superior visibility.  A second vertical rotating dial, which is compared with a fixed miniature airplane (lubber line), presents the magnetic heading of the aircraft at all times making heading information more natural.  The easy to read presentation allows the pilot to see the complete 360 degree dial.  They also feature an internal LED light and a universal mounting bracket.

HONEYWELL BENDIX KING®  TSO'd KMA 24 & KMA 24H Audio Panels ae probably ones of the most common audio panels found in aircraft. They are compact, self contained, fully solid-state TSO'd Audio Panels featuring push button audio selector panel, speaker and headphone isolation amplifiers, and a marker beacon receiver. The KMA24 controls as many as 3 transceivers and 6 receivers, including the internal marker beacon receiver and its automatically dimmed 3-light indicator. The KMA 24H controls up to 5 transceivers and 5 receivers, or 4 transceivers and 6 receivers. The KMA24H includes the internal marker beacon receiver and VOX intercom, which provides unprecedented flexibility. 

BENDIX KING® KMA 24 & KMA 24H Audio Panels are DISCONTINUED products. Although some NEW units may be available under special order or while stocks exist, they are mostly offered for outright sale or in exchange / trade-ins  (*) for returned customer owned units in USED (Serviceable or Overhauled) Conditions (**) and  accompanied by the relevant certification (e.g. yellow tag, 8130-3 form). The letters "SV","OH" and "EX" in the product reference numbers (SKU) indicate the condition/sale terms. Racks & connectors (for new installations) are sold separately.

BENDIX KING® KMA 24 & KMA 24H Audio Panels are sold on demand. Require backordering. Delivery time cannot be specified.

(*) In the case of an exchange/trade-in option of a customer unit, the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders when our co-operating supplier verifies that the unit is in a reasonable, repairable condition. It is recommended that this option is selected by our customers mainly for upgrades and only in cases when their units are functioning properly at the time removal from the aircraft. In cases when customer units are found by our supplier to be non-repairable, the core deposit shall not be refunded and shipping charges shall apply if customers wish the return of these units to them. 

(**) As per FAA requirements, Serviceable Condition means that the units have been repaired as needed and tested according to the manufacturer's procedure to meet the manufacturer's performance specifications.  They are legally approved for installation and use (return to service). In this condition, the unit is NOT disassembled unless problems and/or repair needs are detected during testing. In Overhaul Condition,  the units have been tested to determine any problems, disassembled, inspected, cleaned and repaired as necessary, reassembled, tested and aligned as required by the manufacturer manual and finally certified that they meet manufacturer’s specifications.

The AVIASPORT indicators (gauges) are reliable, accurate and solid, combining the accumulated experience of more than twenty years with the latest technology  They have been designed for ROTAX engines and their display areas are divided into red, green and yellow zones in line with Rotax limits. They use a pointer that turns 240º or 320º, providing high resolution. AVIASPORT range of gauges includes CHT, EGT, tachometers, oil and fuel pressure, oil and coolant temperature, fuel level, voltmeters & ammeters and offered with casings of different sizes: 80mm; 57mm and 52mm.

The AVIASPORT fuel pressure gauges  have been designed especially to measure fuel pressure in Rotax® engines 912 and work both with 12V and 24V systems. Unlike mechanical gauges, the AVIASPORT ielectronic gauges use a high precision sensor to be installed close to the engine, preventing fuel lines in the cockpit. These gauges are sold without sending units or as kits with matching senders whenever specified.

This 2-1/4 inch flap indicator uses a resistance potentiometer as a flap position sensor. Transmitter is required. Wt: 9.8 oz.

Sigma-Tek Light tray to connect lighting to Sigma-Tek 5000B Attitude Gyro and other avionics and instruments. Available in 14V or 28V versions.

HONEYWELL BENDIX KING® manufactures a range of TSO'd VOR/LOC/Glidescope indicators. These navigation instruments include VOR/LOC left-right needles, To-From indicator, VOR/LOC warning flag, glideslope deviation needle, glideslope warning flag and 30Hz OBS resolver. Depending on the model, the feature rectilinear instead of pendulum type meter movements for more precise indicator readings, 14/28 volt internal lighting, metal bezel with glass lens and course datum synchro for autopilot use.

These indicators are commonly used with BENDIX KING® remote mounted VOR/LOC converters such as KN-72 or KN-77, remote mounted Glideslope Receivers such as KN-73 or KN-75, KNS-80, KNS-81 nav systems and KX-155/KX-165 NAV/COMM transceivers.

The KI203 model features an internal VOR/ LOC converter and it is compatible with the BENDIX KING® KX155 transceiver. It has a rectilinear meter movement. Compatible with the BENDIX KING KX155 NAV/COMM transceiver.

The KI 204 VOR/LOC/Glideslope Indicator features a built-in VOR/LOC converter and scallop rejection filter, rectilinear needle movement and an optically coated glass lens. Requires input from external glideslope receiver. Compatible with the BENDIX KING® KX 155 or KX 155A NAV/COMMs. Requires input from external glideslope receiver.

The KI 206 VOR/LOC/Glideslope Indicator is rectilinear and internally lighted. It is used with the KNS 80/81 units, KX 165  transceiver and the KNR 634 VOR/LOC/GS/MB receiver. It is available with course datum synchro.

The KI208 model features a built-in VOR/ LOC converter and it is compatible with the BENDIX KING® KX 155 or KX 155A NAV/COMMs. It has a  pivoted needle action and a plastic lens.

The KI209 model features an internal VOR/ LOC converter and it is compatible with the BENDIX KING® KX155 transceiver. It features a pivot needle action.  The KI209 model includes GPS interface capability.

Highly reliable and field-proven, the ADF 3500 direction finding systems by BECKER AVIONICS are trusted by the most reputed aircraft manufacturers. Suited for rotary and fixed wing applications, the ADF 3500 can be operated either in a standalone fashion or within EFIS, FMS or integrated flight deck systems.

The ADF 3502-() Receiver is designed for professional applications in the frequency range 190.0 kHz to 1799.5 kHz. The system is ideally suited for installations where minimum space is available. The small, lightweight control unit CU 5502 fits into a standard 2 ¼” (57mm) round instrument cutout and is only 2 ½” deep. The ADF Receiver can be installed at any convenient place in the aircraft. The RS 422 interface between CU and Rx reduces inter-wiring. The control unit CU 5502 offers a clear, high contrast, double line display, which is readable under all lighting conditions, even in bright sunlight. The frequency can be selected in 0.5 kHz/1kHz, 10 kHz/100 kHz steps by using variable speed frequency control. The pre-selection in the channel memory of the preset display allows instant switchover by pushing a “Flip-Flop” key to a new NDB en-route for indication of the cross bearing for a position fix relatively to a second NDB. The output of the receiver is compatible with indicator ID 3502 and the converter AC 5303/04 for RMI.

The ADF 3500 system features an extensive automatic self-test function. After switch-on, the microprocessor and the frequency synthesizer are thoroughly checked by a test subroutine. The remote receiver RA 3502-() unit can also be controlled by CDU of FMS systems.

JTSO certified for either VFR or IFR use in all types of fixed wing and rotary wing aircraft, the ADF receiver can also be combined with other Becker Prime Line equipment, such as VHF-COM, NAV-VOR/ILS navigation and Mode S transponder systems which have similar control units, providing a pleasant presentation in the panel.

RA3502 REMOTE ADF RECEIVER SYSTEM Features:

Compact and lightweight design

No forced cooling

No ventilation slots

Field-proven reliability

Robust and maintenance-free design

Operating altitude: 50,000 ft

RS422 control interface for EFIS or FMS integrations

Active LOOP/SENSE antenna

RMI connection via RMI convertor

Integrated BITE

JTSO, TSO certified

GARMIN® GA 35 GPS WAAS is a FAA TSO'd antenna suitable for use with Garmin GPS devices like the GTN 650 GPS/NAV/COMM/MFD. Antenna connection is female TNC out. For installation of this GPS antenna the use of  RG 400 or RG 142  and a male RG400/142 TNC connector is recommended. The mounting plate for this antenna is sold separately.

The RAY ALLEN (RAC) RP4 LED position indicator is designed to be installed in the cockpit providing an indication of the servo output shaft position. This indicator supercedes and it is a direct replacement for previous RAC RP3. The RP4 indicator uses ten LED lights to show the position of a actuator output shaft (or position sensor arm). There are also two amber colored LED's, one on each end of the indicator scale, to act as a reference for the green indicator light, especially in dark conditions. The 10 LEDs are the brightest available for superior visibility in sunlight, but can be dimmed for night flight. It can be installed horizontally or vertically. 

The RAC RP4 position indicator is panel mounted using a faceplate and two countersunk, 2-56 x 7/16" screws (two spare finishing screws are included). The distance between the screw holes is identical to the older Ray Allen RP3 LED indicator. Although the faceplate dimensions are identical between the RP3 and RP4 indicators, the panel cutout size is slightly different between the RP3 and RP4. If you are replacing and older unit with a new RP4, you will only need to increase the size of your panel hole. The RP4 faceplate will cover the older RP3 panel hole.The RP4 faceplate measures 1.75"(45 mm) X .75"(19 mm) and it is 1.6"(41 mm) in depth. It is now the standard position indicator included in Ray Allen trim systems, or can be purchased separately for special applications such as a cowl or wing flap indicator.

The RP4 includes a RP4-L1 label (featuring Elev1, Elev2, Ail, Rudder, Flaps). A RP4-L2 label (featuring Cowl Flaps, < >, on/off) is also available and is sold separately. 

NOTE: Labels can only be ordered together with . In ordering these high quality labels please be advised that rocker switches and needle indicators require a large label, LED indicators use a small label. Can be only included in orders of respective RP4 position indicator(s) (not separately).

EASA Certified VHF transceiver in 160mm format with 6W output power. Automatic selection of 8.33kHz/25kHz spacing and OLED display.

Manufactured with high quality PC/ABS, the AERA 500 Panel Doc by AIRGIZMOS, maximizes its use by placing the GPS right in the aircraft  panel and hold securely in place without blocking any other instruments. Aera 500 Panel Dock™ is suitable for the  Garmin AERA™ 500 series of GPS (500/510/550/560). It makes GPS touch screen controls easier to navigate and matches the look and feel of the rest of the avionics stack, resulting in a pleasant, professional looking panel. Dimensions are 6.25" wide by 4.25" high. Garmin has reduced the number of connectors on the AERA 500 series  by using a docking connector. This docking connector has been integrated in the design and nests into the back of AIRGIZMOS Panel Dock.

ETSO'd Slimline Panel Mounted 16 W VHF Radio with built in 2-place intercom with auxiliary inputs for stereo music and audio warnings. Available with 8.33 kHz or  25kHz frequency spacing options.

EASA Certified VHF transceiver with 6W output power and 8.33kHz frequency spacing.

These UMA new manufacture NON TSO'd electric ammeters offer accuracy, rugged construction, and contemporary styling. They are available in different  measurement ranges with a 270° sweep and are suitable for installation in 2-1/4" panel hole diameters. Made in U. S. A. and furnished with shunt.

The AV-534 is a TSO'd heavy-duty stainless steel bent whip VHF communications antenna with porcelain insulators and mounting hardware. The AV-534L is same antenna as AV-534 but furnished with 96" lead of RG58 A/U cable with male BNC and ground strap with lugs.

KANARDIA INDU Series round Airspeed Indicators are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters. They feature an LCD display with possibility to personalise the displays and scales. They are offered as standalone (master) IAS units with internal pressure sensors or as slave instruments. The slave version requires a master altimeter or some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the CAN bus. 

KANARDIA INDU Series round altimeters are available for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15"). As an option they can be ordered with an Outside Air Temperature (OAT) digital sensor at additional cost. When static pressure (altitude) is present on the CAN bus, OAT sensor enables also the TAS  as well.

Scale Ranges:

-KMH Scale in kilometers per hour (0-280)

-KTS Scale in knots (0-140)

-MPH Scale in miles per hour (0-150)

NOTES:

A high speed sensor option is also available at additional cost (up to 460 km/h, 250 kts, 285 mph)

Arc colors need to be specified  at the time of order.