The AL2024 aluminum alloy (with copper as the primary alloying element) also known as aerospace grade aluminum, is commonly used in aircraft structural applications due to its high strength and fatigue resistance.  It is suitable for applications requiring high stress and strain resistance. The AL2024 aluminum alloy is stronger but less versatile than AL6061 alloy, which is more corrosion resistant, easier to weld, and more suited to machining, but less strong than the AL7075 alloy.

AL2024 aluminum alloy sheets come as Annealed (O Temper) without heat treatment or as heat treated to attain their maximum strength. Heat treated sheets are available in vatious T tempers (such as T3,T4,T5,T6 and T651) for use in a range of aviation and industrial applications.

2024-O CLAD (ALCLAD) Aluminum alloy sheets(*) are offered as part of AVIATIONEU NEW ERA product lines and they consist an excellent choice when high corrosion resistance is needed. Sourced from quality producers, these sheets  are readily formed in the annealed condition and may be subsequently heat treated. They feature good machinability and can be machined to a high finish. They are offered in different thicknesses and specific widths and lengths in inches. They comply with AMS and ASTM specifications.

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the individual product presentations or contact us for quotation.

(*) ALCLAD is a corrosion-resistant aluminium sheet formed from high-purity aluminium surface layers metallurgically bonded (rolled onto) to high-strength aluminium alloy core material. As an enhanced sheet for fuselage applications, ALCLAD offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. ALCLAD also offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy.

AL2024 is an aluminium alloy, with copper as the primary alloying element. It is used in aircraft structural and other applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. This alloy  comes in  Annealed (O) condition  or different tempers and is readily formed and machined to a high finish in the annealed condition. It can be both hot and cold worked or forged, as well as welded through inert gas consumable electrode arc methods.

AL2024 extruded angles are produced by forcing a heated alumnium billet through a die of the proper shape by means of a hydraulic press. 

Sourced from quality producers they are offered in T3 or T3511 tempers but also in other tempers as part of our own branded (AVIATIONEU NEW ERA) product lines. The applicable temper is indicated in the product reference number (SKU). 

Both 2024-T3 aluminum and 2024-T3511 aluminum are variants of the same material. They share alloy composition and many physical properties, but develop different mechanical properties as a result of different processing (please refer to the respective property tables).

These angles are offered in different widths, heights  and thicknesses in inches and cut to order lengths in feet. Appearing sale price is per foot. If manufacturing test reports are required, additional charges are applied per order. For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for price on any unlisted size.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. It is  frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and other equipment, pressure vessels, treadplate, containers, and applications.  Alloy 5052 has a good marine atmosphere corrosion resistance of saltwater and excellent workability. Main features of this alloy include: non heat-treatable, excellent weldability, high corrosion resistance, smooth surface, lightweight, high-tensile strength.

Extruded bars/rods from 5052 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 5052 H112 Temper square bars are offered in different dimensions 5 mm × 5 mm (13/64" x 13/64") up to 150 mm × 150 mm (5-29/32" x 5-29/32") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

Structural screws are made of alloy steel, are properly heat treated, and can be used as structural bolts. Those commonly used in aircraft applications are manufactured to aerospace/military standards/specifications. They are offered as part of our own branded (AVIATIONEU NEW ERA) product lines structured in different series based on the standard of their conformance. Some of the screws commonly used include NAS204 through NAS235 and AN509/AN525 series. 

MS24694 Series structural screws have a 100° countersunk Phillips head. They replace the respective AN509 series structural screws of materials and finishes. Minimum tensile strength for steel is 125,000 psi. They are fabricated from alloy steel and cadmium plated per specification QQ-P-416A, Type II, Class 3 or 300 Series Stainless Steel unplated designated by the letters "S" and "C" respectively in the product part number after MS24694 and before the size number.

Sourced from quality suppliers, AVIATIONEU NEW ERA MS24694 series structural screws are offered in different thread sizes and lengths in inches and sold in pieces. For more information, please refer to the individual product presentations, the supplied documentation or contact us.

AL2024, the so-called aircraft aluminum, is an aluminium alloy, with copper as the primary alloying element. It is used in applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. The addition of copper to this alloy makes 2024 one of the strongest aluminum alloys. It comes in different tempers (O without heat treatment or T with heat treatment). It is non-magnetic and heat treatable but it also is more succeptible to corrosion than most other aluminum alloys. 

Due to the poor corrosion resistance of this alloy  it is often clad (specified as CLAD or ALCLAD) in which case high-purity aluminium surface layers are metallurgically bonded to the aluminium alloy core material. 2024-T3 is typically used in structures where a high strength to weight ratio is necessary, clock parts, computer parts, hydraulic parts, bolts, valves, nuts, pistons, and gears. 

AL2024 tubes/pipes are offered as part of our own branded (AVIATIONEU NEW ERA) product lines.Tubes are designed to act as structural support, whereas pipes are designed to carry liquids and gases. AL2024 tubing comes in different shapes (round, square, orthogonal and others), tempers, dimensions and pre cut or cut to order lenght options with the ability to be heat treated for even higher strength, all at an affordable price. 

The AVIATIONEU NEW ERA Aluminum alloy round tubes 2024 T3 temper are frequently used for aerospace as they offer an excellent strength-to-weight ratio, high fatigue resistance, and average machinability. They are offered as drawn and are available in different outer diameters, wall thicknesses and pre cut lengths in inches or cut to order lengths in feet. Depending on the producer they meet AMS -4088, AMS -WW-T-700/3 and ASTM B210 specifications. For additional information, please refer to our Brief Guide on Aluminum Grades & Temper Designations or contact us.

Aluminum alloy 7075 (AL7075) is another "aircraft grade" aluminum with zinc and copper as its major alloying elements. Like aluminum alloy 2024 ((AL2024), AL7075 is a flexible and durable aluminum alloy extremely useful in highly stressed parts. Typically used in aerospace and defense, automotive, manufacturing and other applications requiring lighter weight and durable materials. This alloy is one of the strongest alloys available and is comparable to many types of steel featuring a high strength, low density (high strength-to-weight ratio), but also thermal properties and ability to be polished which makes AL7075 a preferred choice for the mold making industry. 

AL7075 aluminum alloy sheets are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality producers, they come in T6/T651 tempers (heat treated) and offered for cut to order in different thicknesses, widths and lengths, consisting a cost effective solution when large quantities of such sheets are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destinationcan be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the individual product presentations or contact us for quotation.

Sourced from quality manufacturers, our own branded (AVIATIONEU NEA ERA) aviation headsets are offered in different series outlined below, each with PNR and ANR models for airplanes and helicopters. 

Models for airplanes and other General Aviation uses come with PJ-055/PJ-068 dual plugs while those for helicopters come with a military grade U174 plug.

With their competitive prices, advanced design and features, quality materials and rigid construction, AVIATIONEU NEA ERA headsets combine performance, functionality and comfort to provide cost effective solutions for every need.  ANR models (*) are offered with or without Bluetooth capability to enjoy music and mobile communications. All our headsets are accompanied by our Certificate of Conformance and 12-months manufacturer warranty.

100 Series

AVIATIONEU NEA ERA 100 Series of aviation headsets includes PNR model 100 for airplanes and 100H for helicopters with 23dB and 24dB  noise reduction ratings respectively. These are Low cost, entry level headsets, ideal for General Aviation pilots and flight schools. 

This series also includes ANR 100A models of aviation headsets for airplanes with a 29dB noise reduction rating. They are offered without or with Bluetooth capability, indicated by the letters "BT" in the product reference number (SKU).

AVIATIONEU NEA ERA 100/100A aviation headsets are offered in multiple colors to meet pilots' style requirements: Grey/Black (Stocked) and Green/Pink/Red/Yellow/Blue (On Demand as special order).

400C Series (Ultra Light Carbon Fiber Aviation Headsets)

Combining high performance, modern design, robust construction and an ultralight weight (only 9oz, 255g) the AVIATIONEU NEA ERA 400C series headsets are intended for use in air transport and military operations or by demanding pilots who seek high performance, functionality and confort headsets with an ultra light weight. Offered in carbon fiber black color. Various models include:

400C and 400CH PNR headsets, offered for airplanes and helicopters respectively, with 23dB  noise reduction capability.

400AC and 400AHC ANR headsets, offered for airplanes and helicopters respectively, with a 29dB noise reduction rating. They are offered with or without Bluetooth capability.

Please refer to the additional information and specifications provided in the respective product presentations or contact us.

(*) ANR function is powered by an AA battey in a supplied battery box with toggle switch.

AL6061 is an aluminium alloy, with magnesium and silicon as the primary alloying elements. It is one of the most common alloys of aluminum for general-purpose use. Commonly available in pre-tempered grades such as 6061-O (annealed) as well as tempered grades such as 6061-T6 or 6061-T651. It can be compared with AL5052 (the highest strength alloy of the more non-heat-treatable grades) as well as with AL6063 which  is similar in composition and mechanical properties. AL6061 main features include: heat-treatable, excellent machinability, excellent corrosion resistance, semi-smooth surface, lightweight, high-tensile strength. Commonly used in transportation components, recreation products, machinery and equipment, and consumer durables.

Extruded bars/rods from 6061 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 6061 H112 Temper rectangular bars are offered in different dimensions 3.0 mm (1/8') -100 mm (3-15/16") × 10 mm (25/64") -300 mm (11 13/16") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

AVIATIONEU NEW ERA engine/IDG oil servicing carts are offered as part of our own label product portfolio of Aircraft MRO Equipment and they are indispensable equipment for any Maintenance, Repair and Overhaul (MRO) facility. These carts are intended for use as fillers of oil in the aircraft engine and the Integrated Drive Generator system, or IDG, a key power system found on aircraft that controls all of the engine hydraulic systems. For more information and a quotation please contact us.

NAS machine bolts are commonly used in aircraft, space shuttles, military vehicles, drones, and other high-performance applications. They are offered in different series to meet application requirements. NAS6203 through NAS6210 series include hex head, close tolerance, alloy steel, short thread, self-locking & non-locking bolts.

Sourced from quality producers, NAS6203 through NAS6210 series are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. These fine-threaded, dimpled-head hex bolts have a minimum tensile strength of 160,000 psi and a minimum shear strength of 95,000 psi. Thread length is consistent within each diameter (1103/6203 series have a shorter thread), and grips are available in 1/16” increments beginning at 1/16”. Used in applications where a premium-quality, high strength bolt is necessary. They come in different nominal diameters: NAS6203: 3/16 in. (0.1875"), NAS6204: 1/4 in. (0.25"), NAS6205: 5/16 in. (0.3125"), NAS6206: 3/8 in. (0.375"), NAS6208: 1/2 in. (0.500"), NAS6210: 5/8 in. (0.625").

NAS6203 series shear hexagon head bolts with a 10-32" thread supercede NAS1103 high strength bolts. Their shearing feature is used to minimize damage to critical components of the application.They are made from alloy steel with cadmium or chromium finishes and offered in different grips and lengths in inches with undrilled or drilled head and/or shank. They are sold in pieces.

The following letters after the basic part numbers specify the material, finish and drilling condition of these bolts.

No Finish Code for cadmium plated bolts

"C" for chromium plated bolts

"L" for self-locking bolts

"P" for self-locking bolts with patch type locking element only

Grip Dash Number indicating grip in .0625 increments

"D" after the grip dash number for drilled thread bolts

"H" after the grip dash number for bolts with drilled head

More than one code letters may be used in sequence.

For more information, please refer to the supplied documentation or contact us. 

Floating nut plates are low profile and lightweight nut plates used to install a captive nut behind a panel. The floating nut plate (aka anchor nut) allows for an assembly that is not perfectly aligned. 

MS21061/MS21062 Series nut plates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers they are floating low height self-locking, one lug  anchor nuts. Those included in MS21061 series are manufactured from cadmium plated carbon steel while the MS21062 nutplates are produced from corrosion resistant steel (CRES). They are available in different Unified thread sizes, with plain or countersunk rivet holes on each side and come with or without a dry film lube. 

Nut plates with a dry film lube are specified by the letter "L" in the part number. Nut plates with countersunk rivet holes are specified by the letter "K" at the end of the part number.

Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

Hose and pipe clamps are significant joining fittings included as part of our own branded (AVIATIONEU NEW ERA) product lines. Sourced from quality ISO certified producers, AVIATIONEU NEW ERA hose clamps are available in diferent styles, such as American, German, British or European, materials and finishes (steel,zinc plated or stainless steel)  as well as technical specifications (structure, clamp size (diameter range), band width, band  thickness and screw type). The right combination of clamp style and technical characteristics ensures compliance of the clamp with requirements for general use or a wide range of applications in different sectors (automotive, construction, industrial and others) to ensure their operational integrity and safety. They are sold in packs with the number of clamps included in each pack designated after the letters "PK" in the product reference number (SKU). 

The following letters in the product reference number (SKU) indicate:

A: American Style

GM: German Style

B: British Style

EU: European Style

T: T Style

xxx-xxx: Clamp Range (Size) min and max diadeter of the clamp

W1:All steel,zinc plated

W2:Band and Housing stainless steel,steel screw

W4:All stainless steel(SS201,SS301,SS304,SS316)

To find the best clamp for your needs please consult the supplied documentation or contact us.

MS21048/NAS680 Series nutplates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers these low height fixed self-locking two-lug nutplates are made from corrosion resistant steel (CRES) with a passivated finish. They are same as those of MS21047 series except that they are made from stainless steel 450F or 800F with silver plating. They have a nylon insert and are available in different Unified thread sizes, with plain rivet or countersunk rivet holes on each side and come with or without a dry film lube. MS21048 nutplates supercede AN362, AN366, NAS680  and are superseded by NASM21048 series.

Nutplates with a dry film lube are specified by the letter "L" in the part number.

Nutplates with countersunk rivet holes are specified by the letter "K" in the end of the part number.

Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

AVIATIONEU NEW ERA air relief valves can be used in different industrial applications. They are made from different materials,  EN 1AL (free cutting steel), 1SMnPb30+C or SAE 12L13  and zinc plated. Available in the following sizes:

Metric: M10 x 1 ARV

British Standard Pipe (BSP): 1/8" BSP ARV

U.S. National Pipe Thread (NPT): 1/8" NPT ARV, 1/4" NPT ARV

Sold by the piece (pc.) with Minimum Order Quantity (MOQ) 1000 pcs.  Appearing price is for reference only per pc. Please contact us for a quotation.

AL7050 (known as a commercial aerospace alloy) is a heat-treatable aluminium alloy with zinc as the main alloying element, combining high mechanical strength, good stress corrosion cracking resistance and toughness at subzero temperatures. Typical mechanical properties of 7050 aluminum in metric and imperial systems include a tensile strength of 515 MPa (74695 psi), a yield strength of 455 MPa (65992 psi) and a fatigue strength of 240 MPa (34809 psi). Particularly suitable for heavy plate aerospace and other commercial and military applications, such as fuselage frames, bulkheads, wing skins and aircraft structures.

Extruded bars from 7050 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered in different shapes, (round, rectangular and square), tempers (e.g. as Fabricated (F) or H112 tempered), specifications, diameters/thicknesses and cut-to-oder lengths to meet order requirements. 

7070 aluminum alloy square bars are available in different dimensions 5 mm × 5 mm (13/64" x 13/64") up to 150 mm × 150 mm (5-29/32" x 5-29/32") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film. 

The landing gears and doors used in commercial airplanes are moved by a set of actuating cylinders. For each door, a cylinder opens and closes the door. Landing gear door locks offered as  part of our own label  AVIATIONEU NEW ERA product portfolio of Aircraft MRO Equipment are high strength steel clamping tools which retain the door actuator in closed position. They fit around the actuator and secure two tension rods to the door Iinkage. For more information and a quotation please contact us.

Machine screws are one of the more widely used products among dozens of standard fastener types. They can be either coarse-threaded or fine-threaded, and are usually available with a wide range of head types. Usually stronger than many other screw types, they are used for fastening metal parts and panels securely together in a range of construction and other applications including aerospace, machinery, vehicles, engines, tool assemblies, electronic devices, and large-scale industrial equipment. 

Sourced from quality producers,  machine screws are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines conforming to aerospace/military or industrial standards/specifications.  They come in different sizes, head types, materials and thread gradings.

AVIATIONEU NEW ERA AN526 series screws are mil spec truss-head non-structural machine screws made of carbon steel and cadmium plated. Minimum tensile strength 55,000 psi. Available in slot head or Phillips recessed head indicated by the letter "R" in the product part number. They are available in different sizes and lengths in inches and sold in packs. The number of screws per package is indicated after the letters "PK" in the product reference number (SKU). For more information, please refer to the individual product presentations, the supplied documentation or contact us.

Sourced from quality producers, AVIATIONEU NEW ERA general purpose brass check valves with nylon cover are suitable for use in hydraulic, heating, air conditioning and pneumatic installations in vertical, horizontal or oblique positions. They are manufactured in accordance with ISO 228 standard and they are available in different sizes. Sold in pieces.

Machine screws are one of the more widely used products among dozens of standard fastener types. They can be either coarse-threaded or fine-threaded, and are usually available with a wide range of head types. Usually stronger than many other screw types, they are used for fastening metal parts and panels securely together in a range of construction and other applications including aerospace, machinery, vehicles, engines, tool assemblies, electronic devices, and large-scale industrial equipment. 

Sourced from quality producers,  machine screws are offered as part of our own branded (AVIATIONEU NEW ERA) product lines conforming to aerospace/military or industrial standards/specifications.  They come in different sizes, head types, materials and thread gradings. Countersunk screws allow the head of the screw to sit flush with or below the surface of the surrounding material. They may also be used to remove the burr left from a drilling or tapping operation thereby improving the finish of the product and removing any hazardous sharp edges.

AVIATIONEU NEW ERA MS35206 and MS35207 series of machine (non structural) screws are mil spec pan head cross recessed (Phillips) screws, manufactured from carbon steel and are cadmium plated to specification QQ-P-416, Type 2, Class 3. MS35206 series machine screws feature 60,000 psi min. tensile strength and can be used as replacements for AN526 truss head & AN515 round head screws. MS35207 series machine screws are fine threaded have a minimum tensile strength of 55,000 psi and replace the AN507R series. Both MS35206 and MS35207 series machine screws are offered in different diameters, thread sizes and lengths in inches and they are sold in pieces. For more information, please refer to the individual product presentations, the supplied documentation or contact us.

AL6061 is an aluminium alloy, with magnesium and silicon as the primary alloying elements. It is one of the most common alloys of aluminum for general-purpose use. Commonly available in pre-tempered grades such as 6061-O (annealed) as well as tempered grades such as 6061-T6 or 6061-T651. It can be compared with AL5052 (the highest strength alloy of the more non-heat-treatable grades) as well as with AL6063 which  is similar in composition and mechanical properties. AL6061 main features include: heat-treatable, excellent machinability, excellent corrosion resistance, semi-smooth surface, lightweight, high-tensile strength. Commonly used in transportation components, recreation products, machinery and equipment, and consumer durables.

Extruded bars/rods from 6061 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as  T6/T651 tempered in different dimensions. 

AVIATIONEU NEW ERA 6061 Aluminum square/rectangular bars are produced by extrusion and are offered in T6 or T651 Tempers, in different dimensions in inches and cut to order lengths in feet (in increments of one foot) to meet application requirements. They comply with ASTM-B221 and AMS-QQ-A-200/8 specifications. For additional information, please refer to our Brief Guide on Aluminum Grades & Temper Designations,  the individual product presentations or contact us.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.