TIMKEN® lock nuts and respective lock washers are used in the mounting of straight bore bearings on shafts. They are available for bearings in the various series. Their dimensions relate to the bearing bore sizes.

Stainless Steel Single Shank Ball for swaging on to wire rope and aircraft cable. Used to terminate aircraft cable ends. Conforms to Mil Specification MS20664C. Available in different breaking strengths (lbs), hole diameters (in.) and for differnt cable sizes (in.).

Barksdale B1S series are bourdon tube stripped high accuracy pressure switches with a working pressure up to 18,000 psi.

Barksdale's bourdon tube pressure switches offer instrument class accuracy, making them an ideal solution to your pressure control needs when accuracy is critical. Built-in over-travel stops allow for higher proof pressures than most other pressure switch technologies. Setpoints are easily adjusted via an internal adjustment screw. Available in single and dual configurations, Bourdon Tube Pressure Switches are adaptable for use in a wide range of industrial applications. A variety of limit switches is available to allow for a multitude of electrical switching conditions. For applications requiring a highly accurate switch in a highly durable package, Barksdale's bourdon tube pressure switches are the ideal solution.

Offered pressure switches in B1S series are of single setpoint. Connection material is stainless steel and electrical connection is through lead wires.

Product Features:

High accuracy

High pressure up to 18,000 psi

Tamper-proof external adjustment

Single and dual switching capability

Water tight housing versions available (NEMA 4)

Applications:

Oil & gas

Medical applications

Mining

Compressors

Power plants

Water pumps

Hydraulic power units

Pneumatic devices

General industrial applications

The RBC® BEARINGS offers a full line of airframe control ball bearings to the aerospace industry  in both “Standard” and “Precision” series. The prefix “M” in a bearing number indicates that it is of a precision series. Although designed and manufactured under demanding quality control requirements for airborne systems, these bearings have been successfully used in many industrial applications, where oscillatory movement, high loads, or corrosive environments are prevalent.

RBC® BEARINGS airframe control ball bearings conform to SAE-AS7949 (formerly MIL-B-7949) and many major OEM specifications. These bearings are of lightweight design, corrosion-resistant, grease-lubricated, and typically sealed. Airframe control bearing rings and balls are made of hardened bearing alloy, AISI 52100, with all exposed surfaces, except bearing bore, caps and seals, plated for corrosion protection. For improved corrosion protection, RBC® BEARINGS  supplies bearings made of hardened stainless steel alloy, AISI 440C. This alloy may be passivated or plated with cadmium or zinc nickel for enhanced corrosion protection.

The RBC® BEARINGS MKSP/MKSP-A SAE-AS7949 Precision Series airframe control self aligning bearings are single row, heavy duty (MKSP) or medium duty (MKSP-A) ball bearings with PTFE seals and CRES sealcaps. These bearings are self aligning for 10 Deg. in either direction  except those with part numbers MKSP4A, MKSP5A and MKSP6A which are self aligning for 8 Deg. in either direction. The RBC® BEARINGS MKSP/MKSP-A bearings conform with MS27645-R specifications. External surfaces (except bore, caps, and seals) are cadmium plated. They come prelubricated for life and are also offered with CRES 440C material and/or zinc nickel plating per OEM specifications. For additional information please refer to the supplied documentation.

Standard single universal joints from CURTIS UNIVERSAL JOINT operate through angles of 35 degrees. For applications requiring greater angles, special design can be employed, enabling the joint to operate at angles up to 45 degrees. Joint is permanently assembled with small bearing pin riveted in place.

Product Specifications (see Chart)

An extensive range of standard MIL-SPEC and Cessna pulleys and pulley kits is offered by McFARLANE® AVIATION. The kits contain all pulleys and cotter pins required to replace all flight control system pulleys in one airplane containing the respective part numbers and quantities required. Different McFarlane pulley series include: 

MCS378 Series phenolic flight control pulleys with ball bearings, FAA-PMA approved replacements for the Cessna S378, A-/BB-, and NAS383- series pulleys on Cessna Aircraft. The MCS378- series pulleys supersede these for most Cessna aircraft applications and  feature high quality sealed precision ball bearings, superior to low grade, open seal bearings used in the Cessna S378-()L light duty series pulleys that they replace.

MS20219 Series aircraft secondary control pulleys, superseding the respective AN219 series pulleys are offered either with high pressure laminated phenolic sheave (MS20219 Series) or aluminum alloy sheave anodized per MIL-A-8625 (MS20219A Series), both with fixed ball bearing with contact seal. The aluminum body is recommended for -1 and -3 pulleys. The -1 pulley should not be installed in flight control systems.

MS20220 Series phenolic flight control pulleys with ball bearings. These supersede the AN220- Series pulleys of like dash number.

MS24566 Series phenolic flight control pulleys with ball bearings. MS24566 pulleys can be used to replace the corresponding AN210 pulleys designated by the letters "A" or "B" in their dash numbers as they differ in the maximum load limit.

NAS383 Series phenolic commercial grade pulleys with graphite impregnated bronze sleeve bearings. These are typically used with a bushing. The MCS378 pulley replaces both the NAS383 pulley and it's bushing.

S394, S1052-1/ S1710-1 Cessna nylon pulleys with no bearings.

S378-4S Cessna pulley similar to S378-4 but with smaller diameter. Used on Cessna airplanes 177RG s/n 177RG0202 and on, and F177RG0038 and on for routing stabilator, stabilator trim, and rudder cables. Six required per aircraft.

1660433 Series Cessna phenolic pulleys with ball bearings.

MS24665 series cotter pins are also available with the pulley kits or separately in packs of 10 or 25.

Please refer to the individual product presentations, the respective charts provided for specifications and cross-reference information or contact us.

Different screws used on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

Static ports are located on the side of an aircraft and function as small air inlets. Their purpose is to measure static air pressure, also known as barometric pressure. The pressure within the static port is collected and then utilized by the altimeter and the vertical speed indicator (VSI). Different static ports are offered, both certified and non certified (the latter with an intended use in homebuilt/experimental aircraft).

Several offered non certified static ports are briefly described below. For certified static ports plese refer to their separate product presentations.

Aluminum Cessna Type

Aluminum single engine Cessna type static port. Externally mounted through a 19/64” hole. Can be used on fabric, composite or aluminum. No need for rivets. 1-3/8” dia.x1” depth.

Aluminum 15160

Aluminum static port for external mounting through 1/4" diameter hole in side of the fuselage. Base has 1/8" NPT female port for connecting to static line (polyethylene fitting included). Installation with 3/32" diameter flush rivets.

Aluminum 15161

Aluminum static port for external mounting through 1/4" diameter hole in side of the fuselage. Base has 1/8" NPT female port for connecting to static line. Installation with 3/32" diameter flush rivets.

Aluminum 15176

Aluminum static port externally mounted in a 1-1/4" base OD outside of the fuselage through 5/16" ID hole. Installation with 4 countersunk 3/32" rivets to skin with pal nuts & lock washers on inside.

A344T Halon 1211 Aircraft Fire Extinguisher by H3R Aviation, Inc. is the company's smallest extinguisher with a gauge. Recommended for a 1-4 person aircraft, including the pilot. Hazardous Material.

AIRFRAMES ALASKA designs and manufactures ALASKAN BUSHWHEEL (ABI) wheels & brakes and tires made for flying and landing off-field in the most rugged backcountry conditions. ABI tires absorb the energy of rough landings, taking the brunt of the impact off the pilots, wheels, gear, and airframe. Unlike your standard aircraft tires, Bushwheels are tubeless. This distinctive design eliminates the problem of tire slippage and stem shearing and makes it possible to run these tires at very low PSI. Different models are offered to suit needs of aircraft operating conditions. ABI tires are FAA TSO C62d approved. Models are available in the following versions and fit standard 6" wheels unless otherwise mentioned:

Standard thread: 3/16"

Heavy thread: 1/4". Heavy tread 26" ABI tires are constructed with a thicker tread layer. Suitable for pilots operating their aircraft on pavement between backcountry flights.

The 26" ABI tires are designed and handcrafted for use on lighter aircraft such as Cessna 182 & Cessna 206. They're also the ideal "entry level" bush tires for pilots upgrading from standard tube type aviation tires for the first time.

A step up in terms of size, 29" ABI tires have a slighter profile and create less drag than larger Bushwheels. This places these bush tires in size/weight sweet spot for heavier aircraft like Cessna and Maule while still providing the footprint and energy absorption critical in bush landings. 

The 31" ABI tires are handcrafted featuring an impressive ratio of weight to size. Their solid footprint makes these bush tires the de facto standard for bush pilots.

The 35" ABI tires are designed for the most rugged off-airport operations. They require ABI 10650 10" wheels.

The 35" Beaver ABI tires stand up to the heavier load of de Havilland Beaver and Pilatus aircraft with a gross weight up to 5600 lbs (2800 static load rating per tire).

AVIATIONEU NEW ERA wire rope slings complements our range of wire cables/ropes providing mechanically spliced, hand spliced or socket robustly manufactured slings made from high grade 1770/1960 raw material. Hand and mechanically spliced slings are offered in different eye/loop types (soft,hard,plain thimble,solid thimble) in different diameters up to 60 mm. The hand spliced slings are of different contruction types (6X19,7X19,6X7) and feature sturdiness, strong construction, long service life and dimensional accuracy. They are offered as galvanized, UN galvanized, and stainless steel and can be used with different fittings (ring, hook, D shackle, turnbuckle). The mechanically spliced  galvanized steel and stainless steel slings are aasy to use, of different contruction types (6X7,7X7,6X19,7X19,6X37,7X37,6X36,7X36) and feature corrosion resistance, high strength and long service life.  The slings with socket from stainless steel are offered in  diameters 5-10 mm in plain eye, hard loop and plain thimble eye/loop types. Sold by the piece with Minimum Order Quantity (MOQ) 100 pieces.  Appearing price is for reference only per piece. Please contact us for a quotation.

Manufactured to the highest standards, the Andair standard fuel selector range incorporates 1/4"(FS16), 3/8"(FS20) and the 1/2"(FS25) valves. These valves allow for multiple tank switching of one fuel line. Duplex fuel selectors are also offered  (see separate product presentations). FS16, FS20 and FS25 series of fuel selectors are designed for safety, provide a precise and smooth feel in operation  and come in different types, ranging from Type 1 ON/OFF shut off valves to valves with multiple positions. To prevent the pilot switching the wrong tank or turning the fuel off they feature  a large red lever with 'Fuel' engraved on it and a clearly labelled fascia plate to indicate which tank has been selected. It allows for a good solid detent at each tank position and also the button on top of the lever must be raised to switch the fuel off.

FS25 series 1/2" fuel selectors has been designed for engines up to 560 HP (50+ GHP), provides a choice of fittings and all units can be operated with an extension and universal joints. They come in the following types:

Type 1 (FS25-1): ON / OFF Shut Off valve for 1/2" fuel lines. There is a 90 degree action between the two positions and included with the valve is the safety button. 

Type 2 (FS25-2): Three way 3/8” fuel selector with positions LEFT-RIGHT-OFF and a 90 degree action between each tank selection. No lower fitting for use where there is little space behind the valve. 

Type 3 (FS25-3): Three way selector with positions LEFT - RIGHT - OFF. No lower fitting. This valve has inlets ports at the Left and Right hand side and the outlet towards the front.

Type 4 (FS25-4): Designed for high wing aircraft, it has four lever positions OFF - LEFT - BOTH – RIGHT with a 90 degree action between each position.There are 3 ports. The lower port is the outlet to the engine and can be Male AN-8, Female 3/8 NPT or a  360 degree Banjo adjustable fitting with a male AN-8 end.

Type 5 (FS25-5): 4 way Fuel Selector ( 3 tanks and OFF ) with positions LEFT - MAIN - RIGHT - OFF, each at 90 degree intervals. The inlet ports are around the side of the valve and the outlet is at the bottom of the valve.

For additional information please refer to the product presentations, the supplied documentation or contact us.

The PARKER AIRBORNE designs and manufactures motor driven fuel fuel  boost and transfer pumps and is part of the PARKER AEROSPACE GROUP of the PARKER HANNIFIN CORPORATION. These pumps consist standard equipment by the world's leading airframe manufacturers. The PARKER AIRBORNE product range includes:

- In Line fuel pumps for low-flow fuel applications,

- Submerged Centrifugal fuel pumps,

- High Performance Centrifugal fuel pumps for use in turboprop or turbofan jet aircraft,

- Submerged Duplex fuel pumps with two distinct pumping elements

The PARKER AIRBORNE fuel boost pumps use 28 V direct current (DC) to drive a highly efficiency, brushless DC (BLDC) motor or 115.5 V alternating current (AC) three-phase induction motors. The BLDCmotor-driven pumps incorporate integral electronic controllers using Hall Effect sensor rotor-position feedback. The hardware-only controller doe not use any software or programmable logic devices. These pumps feature:

-fuel cooled motor and electronics

-fuel wetted carbon bearings allowing for long-life fluid film design with no rotating shaft seals

-a high efficiency brushless DC (BLDC) motor or a three-phase induction motor

-qualification for high levels of lighting and electromagnetic interference (EMI).

Offered pumps are OVERHAULED in accordance with FAA-approved process specification, come with a FAA Form 8130-3 and can be provided in exchange of existing customer owned units (cores). In all exchange cases,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a reasonable condition. For additional information please consult the supplied documentation (*) or contact us.

In addition to the PARKER AIRBORNE pumps, RAPCO FAA-PMA approved pumps are also offered as direct replacements  to the respective PARKER AIRBORNE models. The RAPCO replacement pumps can be furnished as either NEW EXCHANGE or OVERHAUL EXCHANGE (please refer to their separate product presentation).

(*) The supplied documentation is to be used for reference only. When selecting a part for installation consult the appropriate aircraft maintenace manual, parts catalogue, or equipment list for approved data.

The RAY ALLEN (RAC) G3 Series Stick Grips includes four different models: G301, G303, G305 and G307. All feature:

four individual SPDT momentary contact switches to control one or two axis electric trim. The switches are triggered via a traditonal 4-way "hat" type activator. The four trim switches can be wired directly to Ray Allen servos.

high quality switches with 15 amp Honeywell microswitches for superior tactile characteristics. 

slotted one or two axis faceplates. A black faceplate is included. Gray and tan faceplates are also available. 

the hand grip has a textured finish and it is made from a very strong BASF composite with excellent UV resistance.  

The G3 grips are 6.5” (165 mm) tall. 

They feature a momentary contact, SPDT Push-To-Talk (PTT) switch located on the front side of the grip. 

They are designed to fit any stick size up to 1 1/8” in diameter. Three spacers are included enabling easy installation on 3/4”, 7/8” and 1” sticks.

Pre-cut and stripped 26 gage teflon insulated 19 strand wire included. 

A die-cut label sheet with 50 different lexan coated labels is included.

MAGNUM aircraft rescue ballistic parachute systems are manufactured by STRATOS 07 S.R.O with knowledge and long experience in the construction of system components including rocket motors. They include different series produced for many years (like 450, 450 Speed, 501, 601) & newer certificated rescue systems like Magnum 1201 & 1401 for heavier aircraft and higher deployment speeds. They are intended for use in hang-gliding, paragliding, powered hang-gliding, powered paragliding,  unpowered and powered gliders,  gyroplanes as well as a wide range of two- and multi-seat airplanes and helicopters, including Light Sport, Experimental and Ultralights with a maximum 3,960 pounds gross weight, and deployment speeds of up to 199 MPH. Magnum Ballistic Parachutes come in sofpacks or canisters. Rescue systems packed in the softpack are usually installed inside of the aircraft. Rescue systems packed in a duralminium container are installed mostly outside of the aircraft.

Please refer to tables of specifications and notes below for the selection of a right rescue system.

Notes:

The max take-off weight of the aircraft MUST NOT EXCEED the max allowable load of the rescue system.

If the aircraft Vne exceeds the max limiting speed for the rescue system deployment, mounting of the system should be done so that the pilot is informed of this speed.

MAGNUM ballistic parachute systems  are packaged in two parcels (one containing the parachute and the second containing the rocket). Because of the rocket, Haz-Mat shipping is required.

Appearing prices of MAGNUM rescue systems DO NOT INCLUDE cords between parachute and fuselage which are SOLD SEPARATELY. During the order, the length of activating cord from parachute to fuselage must be indicated. Other parts and accessories are also available at additional cost.

Ray Allen Trim Systems are trim servos of flight surfaces offered with different travel options and designed specifically for experimental aircraft.

Fine quality switch from ACS used in many aircraft. The switch housing is machined from billet aluminum which makes this switch 25% lighter. It provides “ON” and “OFF” electrical control of both magnetos on a single engine aircraft. The key-operated switch mounts from the rear of the panel in a 7/8” dia hole. Available with or without starter position. A-510-2 model with starter position is supplied with switch plate two keys. (diode included). FAA PMA Approved. Made in USA.

Model C354TS Halon 1211 Aircraft Fire Extinguisher by H3R Aviation, Inc. carries twenty percent more Halon 1211 than model C352TS, is the same size and uses the same mounting bracket. Hazardous Material.

AS8976 narrow spherical bearings from RBC Aerospace Bearings are available in grooved or chamfered versions from steel (MS21154S grooved & MS21155S chamfered steel series) or bronze (MS21154B grooved & MS21155B chamfered bronze series). For additional information please refer to the attached documentation.

AS8976 Bearing Product Features:

• Qualified to AS8976 (formerly MIL-B-8976)

• Narrow series, metal-to-metal

• Material MS21154S & MS21155S steel series 03-503 and 03-505

Outer ring: Alloy steel, AMS-S-5000, AMS-S-6758 or AMS-S-6050

Inner ring: CRES 440C, HRC 55 min. AMS 5630

• Material MS21154B & MS21155B bronze series 03-523 and 03-525

Outer ring: Aluminum bronze

Inner ring: CRES 440C, HRC 55 min. AMS 5630

EAO HMI Rectangular Lighted Indicators are available in Red, Blue, Green, Orange, Yellow, and Clear colors. Replacement 12V or 24V bulbs can be ordered separately.