Metal Plates, Sheets, Strips, Foils & Leaves

Metal Plates, Sheets, Strips, Foils & Leaves

There are 16 products.

Showing 1-16 of 16 item(s)

Active filters

AVIATIONEU NEW ERA 4130...

Steel alloy 4130 (ST4130), also known as Chrome Moly after the 2 key alloying elements, chromium, and molybdenum, is a general-purpose alloy steel widely used by the aviation and motorsports industries due to its weldability, fabrication, and mild hardenability in all offered forms (tubes, bars, sheets and plates). 

4130 alloy steel sheets are offered as part of AVIATIONEU NEW ERA product lines for a wide range of uses including structural applications, including gears, fasteners, and and aircraft exteriors. These sheets offer good weldability without compromising steel abrasion and impact resistance and can be made even stronger throough heat treatment.AVIATIONEU NEW ERA 4130 alloy steel sheets undergo a heat treating process and they are available in two different material states, Normalized or Annealed,  depending on the process of how the material is heated and cooled. The letters "NRZ" and "ANL" specify respectively Normalized or Annealed state in our Reference Codes (SKUs) for ordering of materials.  4130 Annealed steel sheets are produced to the aerospace specification AMS-6350 (sometimes referred to as "Condition A") while Normalized ones meet aerospace specification AMS-6345 (also known as "Condition N"). Annealed steel sheets are "softer" than their normalized steel counterparts and offer higher workability. Normalized steel sheets offer a higher strength tolerance.

Sourced from quality producers, these sheets are offered in different thicknesses and specific widths and lengths in inches. For additional information, please refer to our supplied documentation, the individual product presentations or contact us for quotation.

AVIATIONEU NEW ERA 4130...

Steel alloy 4130 (ST4130), also known as Chrome Moly after the 2 key alloying elements, chromium, and molybdenum, is a general-purpose alloy steel widely used by the aviation and motorsports industries due to its weldability, fabrication, and mild hardenability in all offered forms (tubes, bars, sheets and plates). 

4130 alloy steel sheets are offered as part of AVIATIONEU NEW ERA product lines for a wide range of uses including structural applications, including gears, fasteners, and and aircraft exteriors. These sheets offer good weldability without compromising steel abrasion and impact resistance and can be made even stronger throough heat treatment.AVIATIONEU NEW ERA 4130 alloy steel sheets undergo a heat treating process and they are available in two different material states, Normalized or Annealed,  depending on the process of how the material is heated and cooled. The letters "NRZ" and "ANL" specify respectively Normalized or Annealed state in our Reference Codes (SKUs) for ordering of materials.  4130 Annealed steel sheets are produced to the aerospace specification AMS-6350 (sometimes referred to as "Condition A") while Normalized ones meet aerospace specification AMS-6345 (also known as "Condition N"). Annealed steel sheets are "softer" than their normalized steel counterparts and offer higher workability. Normalized steel sheets offer a higher strength tolerance.

Sourced from quality producers, these sheets are offered in different thicknesses and specific widths and lengths in inches. For additional information, please refer to our supplied documentation, the individual product presentations or contact us for quotation.

AVIATIONEU NEW ERA 2024...

The AL2024 aluminum alloy (with copper as the primary alloying element) also known as aerospace grade aluminum, is commonly used in aircraft structural applications due to its high strength and fatigue resistance. It is suitable for uses requiring high stress and strain resistance. This alloy is stronger but less versatile than AL6061 alloy, which is more corrosion resistant, easier to weld, and more suited to machining, but less strong than the AL7075 alloy. AL2024 aluminum alloy sheets come as Annealed (O Temper) without heat treatment or as heat treated to attain their maximum strength. Heat treated sheets are available in vatious T tempers (such as T3,T4,T5,T6 and T651) for use in a range of aviation and industrial applications.

2024 ALCLAD T3 Alloy Aluminum Sheets(*) are offered as part of AVIATIONEU NEW ERA product lines for a wide range of uses including aerospace, clock parts, computer parts, hydraulic parts, bolts, valves, nuts, pistons and gears. Sourced from quality producers, these sheets are offered in different thicknesses and specific widths and lengths in inches and they are PVC film covered one/two side(s) (depending on the producer) for protection. Also offered as Annealed (2024 ALCLAD O Temper). They comply with SAE AMS and ASTM specifications. 

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the individual product presentations or contact us for quotation.

(*) ALCLAD is a corrosion-resistant aluminium sheet formed from high-purity aluminium surface layers metallurgically bonded (rolled onto) to high-strength aluminium alloy core material. As an enhanced sheet for fuselage applications, ALCLAD offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. ALCLAD also offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy.

AVIATIONEU NEW ERA Aluminum...

The AL2024 aluminum alloy (with copper as the primary alloying element) also known as aerospace grade aluminum, is commonly used in aircraft structural applications due to its high strength and fatigue resistance.  It is suitable for applications requiring high stress and strain resistance. The AL2024 aluminum alloy is stronger but less versatile than AL6061 alloy, which is more corrosion resistant, easier to weld, and more suited to machining, but less strong than the AL7075 alloy.

AL2024 aluminum alloy sheets come as Annealed (O Temper) without heat treatment or as heat treated to attain their maximum strength. Heat treated sheets are available in vatious T tempers (such as T3,T4,T5,T6 and T651) for use in a range of aviation and industrial applications.

2024-O CLAD (ALCLAD) Aluminum alloy sheets(*) are offered as part of AVIATIONEU NEW ERA product lines and they consist an excellent choice when high corrosion resistance is needed. Sourced from quality producers, these sheets  are readily formed in the annealed condition and may be subsequently heat treated. They feature good machinability and can be machined to a high finish. They are offered in different thicknesses and specific widths and lengths in inches. They comply with AMS and ASTM specifications.

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the individual product presentations or contact us for quotation.

(*) ALCLAD is a corrosion-resistant aluminium sheet formed from high-purity aluminium surface layers metallurgically bonded (rolled onto) to high-strength aluminium alloy core material. As an enhanced sheet for fuselage applications, ALCLAD offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. ALCLAD also offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy.

AVIATIONEU NEW ERA 2024...

The AL2024 aluminum alloy (with copper as the primary alloying element) is often referred to as aerospace grade aluminum as it is often used in aircraft structural applications due to its high strength and fatigue resistance.  It is suitable for applications requiring high stress and strain resistance. The AL2024 aluminum alloy is stronger but less versatile than AL6061 alloy, which is more corrosion resistant, easier to weld, and more suited to machining, but less strong than the AL7075 alloy, also commonly used in the aerospace industry.

AL2024 aluminum alloy sheets are offered as part of AVIATIONEU NEW ERA product lines. They come as Annealed (O Temper) without heat treatment or as heat treated to attain their maximum strength. Heat treated sheets are available in vatious T tempers (such as T3,T4,T5,T6 and T651) for use in a range of aviation and industrial applications (*). Sourced from quality producers, AVIATIONEU NEW ERA heat treated AL2024 alloy aluminum sheets are mostly offered for cut to order in different thicknesses, widths and lengths, consisting a cost effective solution when large quantities of such sheets are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destinationcan be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the individual product presentations or contact us and quotation.

(*) All aluminum alloys, regardless of product form, are classified as either heat-treatable or non heat-treatable, depending upon the method used to attain their maximum strength. The modification methods applied to heat- and non heat-treatable alloys are listed in the Temper Designation System.

AVIATIONEU NEW ERA 7075...

Aluminum alloy 7075 (AL7075) is another "aircraft grade" aluminum with zinc and copper as its major alloying elements. Like aluminum alloy 2024 ((AL2024), AL7075 is a flexible and durable aluminum alloy extremely useful in highly stressed parts. Typically used in aerospace and defense, automotive, manufacturing and other applications requiring lighter weight and durable materials. This alloy is one of the strongest alloys available and is comparable to many types of steel featuring a high strength, low density (high strength-to-weight ratio), but also thermal properties and ability to be polished which makes AL7075 a preferred choice for the mold making industry. 

AL7075 aluminum alloy sheets are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality producers, they come in T6/T651 tempers (heat treated) and offered for cut to order in different thicknesses, widths and lengths, consisting a cost effective solution when large quantities of such sheets are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destinationcan be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the individual product presentations or contact us for quotation.

AVIATIONEU NEW ERA 2024...

The AL2024 aluminum alloy (with copper as the primary alloying element) is often used in aircraft structural applications due to its high strength and fatigue resistance.  It is suitable for applications requiring high stress and strain resistance. The AL2024 aluminum alloy is stronger but less versatile than AL6061 alloy, which is more corrosion resistant, easier to weld, and more suited to machining, but less strong than the AL7075 alloy, also commonly used in the aerospace industry.

AL2024 aluminum alloy sheets are offered as part of AVIATIONEU NEW ERA product lines. They come as Annealed (O Temper) without heat treatment or as heat treated to attain their maximum strength. Heat treated sheets are available in vatious T tempers (such as T3,T4,T5,T6 and T651) for use in a range of aviation and industrial applications. 

Sourced from quality producers, AVIATIONEU NEW ERA AL2024-O aluminum sheets come without heat treatment. They are readily formed in the annealed condition, possess good machinability, may be heat treated and can be machined to a high finish. Since their corrosion resistance is relatively low, they are commonly used with an anodized finish or in CLAD (ALCLAD) form with a thin surface layer of high purity aluminum (please refer to separate product presentations). 

AVIATIONEU NEW ERA AL2024-O aluminum sheets are mostly offered for cut to order in different thicknesses, widths and lengths, consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations,  the individual product presentations or contact us for quotation.

AVIATIONEU NEW ERA...

AISI/SAE(*) 4130 and 4140 grade steels are low-alloy steels containing chromium and molybdenum as common composition elements. Both are are popular steel materials due to their properties. AISI 4130 grade steel shows good overall combinations of strength, toughness and fatigue strength with good atmospheric corrosion resistance while AISI 4140 grade steel features a high fatigue strength, abrasion and impact resistance, toughness, and torsional strength. Both alloys are weldable with the use of all conventional techniques (AISI 4130 alloy's lower carbon composition compared to AISI 4140 allows easier welding) and machinable in the annealed condition. To make them stronger they need to be subjected to heat treatment, such as annealing, cold working, etc. 4140 and 4130 grade steels are wideky used in aerospace, oil and gas, automotive, agricultural and defense industries.

AISI 4130/4140 alloy steel sheets/plates are offered as part of AVIATIONEU NEW ERA product lines for a wide range of uses. Sourced from quality producers, they are cold rolled to increase their strength and produced in accordance with ASTM specificatiions. Competitively priced and offered in different thicknesses (0.2-4 mm or 4-60 mm or 60-115 mm) and cut to order widths (500-1500 mm  or 600-3000 mm) and lengths, they consist a cost effective solution when large quantities of such sheets are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destinationcan be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  

For additional information, please refer to the attached comparison table of specifications for different steel alloys or contact us for quotation.

(*) American Iron & Steel Institute (AISI), Society of Automotive Engineers (SAE)

AVIATIONEU NEW ERA 6061...

Aluminum alloy 6061 is the most commonly used aluminum alloy in the world due to its positive characteristics. It has magnesium and silicon as its main composition elements and is a cold-treated aluminum forging product with the advantages of 4000 Series and 5000 Series. Aluminum 6061, T6 or T651 tempered sheets exhibit above average corrosion resistance, excellent processability with no deformations, high strength, light weight, good weldability, and the ability to be heat treated for even higher strength, all at an affordable price. The difference between T6 and T651 tempers of an 6061 aluminum sheet is that the internal stress of T6 is relatively large and the processing will be deformed under normal circumstances; the suitable state for processing should be T651, which is based on T6 to stretch and eliminate internal stress. Both are typically used in aerospace, automotive, cameras, couplings, marine hardware, electrical components, decorative hardware, structural applications, pins, brakes, pistons, valves, and bicycle frames. Aluminum alloy 6061-T6 sheets from AVIATIONEU NEW ERA product lines are offered in different pre cut thicknesses, widths and lengths and they are PVC covered one side. They meet AMS 4027/ASTM B209 specifications.

AUERHAMMER METALLWERK...

Cladding coils, strips & sheets produced by AUERHAMMER METALLWERK from clad materials with different properties including carbon steels, stainless steels, nickel and copper and FeNi alloys. Cladding process enables combination of a minimum of two different grades of metal (one base material and a layer material) to be joined and form a laminated rolled material with new desired properties, capabilities and functions. A wide range of metals can be combined using cold-rolled cladding process and resulting cladding products  can be furthered tailored to customer requirements by subsequent further cold-rolling and annealing production processes. Deliveries are possible in soft, deep drawing or cold-rolled quality depending on the intended use. Common material properties used for cladding and tested include yield strength,tensile strength, elongation, hardness, formability and grain size or other like electrical resistance. Please refer to the attached documentation for additional information.

AVIATIONEU NEW ERA Cladding...

AVIATIONEU NEW ERA cladding metal alloy strips combine two or more different cladding materials to achieve the optimum of the best characteristics of the individual materials. These strips intended for use in different industrial applications. They are offered in a range of combinations of cladding materials in different thicknesses, widths and lengths meeting order requirements, they are competitively priced, sourced from certified manufacturers and produced in accordance with international standards.  Unit of measurement is 1 kilogram (kg) with Minimum Order Quantity (MOQ) 250 kilograms unless otherwise stated. Sea/sea-surface transport to customer destination is most commonly used. Appr. time for shipping: 3 months from the time of order payment. Appearing prices are indicative per unit of sale. Please refer to any attached documentation  and contact us for additional information/clarifications and quotation.

AVIATIONEU NEW ERA 2024...

The AL2024 aluminum alloy (with copper as the primary alloying element) also known as aerospace grade aluminum, is commonly used in aircraft structural applications due to its high strength and fatigue resistance. It is suitable for uses requiring high stress and strain resistance. This alloy is stronger but less versatile than AL6061 alloy, which is more corrosion resistant, easier to weld, and more suited to machining, but less strong than the AL7075 alloy. AL2024 aluminum alloy sheets come as Annealed (O Temper) without heat treatment or as heat treated to attain their maximum strength. Heat treated sheets are available in vatious T tempers (such as T3,T4,T5,T6 and T651) for use in a range of aviation and industrial applications.

2024 T3 Alloy Aluminum Sheets are offered as part of AVIATIONEU NEW ERA product lines for a wide range of uses including aerospace, clock parts, computer parts, hydraulic parts, bolts, valves, nuts, pistons and gears. Sourced from quality producers, these sheets are offered in different thicknesses and specific widths and lengths in inches and they are PVC film covered one/two side(s) (depending on the producer) for protection. Also offered as ALCLAD(*) for increased resistance to corrosion (see separate product presentation). They comply with SAE AMS and ASTM specifications. 

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the individual product presentations or contact us for quotation.

(*) ALCLAD is a corrosion-resistant aluminium sheet formed from high-purity aluminium surface layers metallurgically bonded (rolled onto) to high-strength aluminium alloy core material. As an enhanced sheet for fuselage applications, ALCLAD offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. ALCLAD also offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy.

AVIATIONEU NEW ERA 15CDV6...

Extending our AVIATIONEU NEW ERA range of metal products, 15CDV6 Alloy Steel metals are now offered as part of AVIATIONEU NEW ERA product portfolio in different forms (tubes, bars, sheets and plates). 15CDV6 is a chromium-molybdenum-vanadium heat treatable steel alloy which combines a high yield strength (superior to SAE 4130) with good toughness and weldability. 15CDV6 can be readily welded with very little loss of properties during welding and without the need for further heat treatment. This alloy is used  in the aerospace and motorsports industries in components such as roll cages, pressure vessels, suspensions, rocket motor casings, wish bones and subframes. Depending on the selected form, AVIATIONEU NEW ERA 15CDV6 Alloy Steel metals are offered in different conditions/specifications (*) and thicknesses, widths and lengths to meet the application requirements. Sold in pieces in cut to order dimensions. For substantial quantities, orders can be placed in tons for higher discounts. Please refer to available dimensions offered for individual products or send us your RFQ for a quotation.

(*) Indicative Conditions/Specifications: WS 1.7734, 15CrMoV6, AIR 9160C, LN 668/MN 1013 (round bars), ASNA 3108/DIN 65389/DIN 65390 (sheets and plates), LN 9369/TE014 (tubes)

AVIATIONEU NEW ERA INCONEL®...

Inconel® is a registered trademark of Special Metals Corporation (SMC) for a family of austenitic nickel-chromium-based superalloys. Inconel® suitability for extreme pressure and heat environments and corrosion resistance allow its use in most demanding operating conditions. Even compared to stainless steel, Inconel® has an incredibly high tolerance for extreme heat, and doesn’t lose as much tensile strength at 2,000°F as most steel alloys.  Inconel® alloy comes in different grades (variations) such as 600, 601, 617, 625, 686, 690, 693, 718, 725, 751, 783 and others. It also used in the production of pipes, tubes, sheets, strips, plates, round and flat bars, etc. but also in the manufacturing of other products including fittings, flanges or fasteners. Some typical sectors/fields of use of Inconel® alloy include:

Oil and gas extraction industries due to its high temperature resistance and oxidation resistant properties,

Heat treat applications, due to its resistance to extreme temperatures,

Saltwater (Marine) Applications, because of its extraordinary resistance to sodium chloride (salt) at a variety of temperatures,

Jet engines and turbines where they need to withstand extreme temperatures (low or high). At a passenger jet’s standard cruising altitude of 36.000 ft., the average air temperature is -56.3°C (-69.3°F), but the combustion process can exceed temperatures of 1.150°C (2120°F).

AVIATIONEU NEW ERA Inconel® strips are intended for use in different industrial applications. They are offered in strips/strip coils in different Inconel® variations  in a range of  thicknesses, widths and pre-cut or cut to order lengths meeting application requirements. Sourced from quality producers these strips are competitively priced. Unit of measurement for pre-cut strips is each (ea.) while for the cut to order strips is 1 kilogram (kg) unless otherwise stated. Appearing prices are  per unit of sale. Sea/sea-surface transport to customer destination is most commonly used. Appr. time for shipping: within 3 months from the time of order payment, depending on the ordered quantity. Please refer to any attached documentation  and contact us for additional information/clarifications and quotation.

AVIATIONEU NEW ERA INCOLOY®...

Incoloy® is a registered trademark of Special Metals Corporation (SMC) for a family of super austenitic stainless steels.They do not have to be heat treated after welding to restore the corrosion resistance. Like other SMC superalloys,  Incoloy® alloys come in different grades (variations) listed in the Product Description and are used in the manufacturing of different products such as pipes, tubes, sheets, strips, plates, round and flat bars, etc. Incoloy® products are mostly chromium-based and mostly nickel-based, and designed for corrosion resistance as well as strength at high temperatures.

AVIATIONEU NEW ERA Inconel® strips are intended for use in different industrial applications. They are offered in strips/strip coils in different Incoloy® variations  in a range of  thicknesses, widths and pre-cut or cut to order lengths meeting application requirements. Sourced from quality producers these strips are competitively priced. Unit of measurement for pre-cut strips is each (ea.) while for the cut to order strips is 1 kilogram (kg) unless otherwise stated. Appearing prices are  per unit of sale. Sea/sea-surface transport to customer destination is most commonly used. Appr. time for shipping: within 3 months from the time of order payment, depending on the ordered quantity. Please refer to any attached documentation  and contact us for additional information/clarifications and quotation.

AVIATIONEU NEW ERA...

Stainless steel strips feature high hardness, toughness, corrosion resistance and low maintenance making them suitable in different industries. AVIATIONEU NEW ERA stainless steel strips are offered in strips/strip coils in different grades (201,202,301,304/304L, 309S,310S,316L,316Ti,317L,321,347,444,904L & 2507) in a range of  thicknesses, widths and pre-cut or cut to order lengths meeting application requirements. A brief description of each grade and respective applications is included in the Product Description section.

AVIATIONEU NEW ERA stainless steel strips are sourced from quality producers and they are competitively priced. Unit of measurement for pre-cut strips is each (ea.) while for the cut to order strips can be kilograms or tons as specified by our suppliers. Appearing prices are  per unit of sale. Sea/sea-surface transport to customer destination is most commonly used. Appr. time for shipping: within 3 months from the time of order payment, depending on the ordered quantity. Please refer to the attached documentation of the various offered grades or contact us for additional information.