Life-Limited & Other Parts, Components & Accessories

Life-limited parts such as filters or spark plugs requiring mandatory replacement within specifed time limits and other aircraft components, parts, & accessories are listed in this category.

Life-Limited & Other Parts, Components & Accessories

Active filters

BRACKETT BA Series FAA/PMA...

The specially treated polyurethane element in the Brackett Aero filters assures near total protection from any foreign material entering the system. Repels water, fire retardant and has good air flow for proper fuel/air ratio. Has no pleats to collect dirt. Low-cost maintenance with increased engine life. FAA approved these air filter assemblies can replace original air filter units. Air filter elements are also offered for replacements.

ACS 15144 'L' Shaped...

ACS Model 15144 'L' shaped, aluminium pitot heads are simple, inexpensive, good-quality suitable for homebuilts. They are available either as pitot only or pitot static. Both have flange mounting to aid underwing fitting.

AEROCONTROLEX ST300-2PT...

AeroControlex ST300-2PT 28V electric heated static port is FAA/PMA approved for use on Embraer ERJ145, Tucano GA Predator, Pilatus PC-9, Shorts SD330, SD360, Rockwell Commander, Bandierante and Westwind aircraft.

Dimensions (L x W x H): 7.38 x 6.38 x 5.32 in.

Weight: .88 lb

AEROCONTROLEX AERO...

Aero-Instruments Company, now part of AeroControlex, has been a supplier of Air Data Sensors for aircraft applications for over 85 years. AeroControlex extensive portfolio of pitot probes is today in use  on a wide range of aircraft ranging from military and large commercial transports to helicopters and UAVs and includes electrically heated pitot probes, pitot-static probes, static pressure ports, angle of attack, temperature sensors and flight test equipment for the aerospace and defense industries. They are designed to meet or exceed all applicable standards, including SAE AS393, DOD MIL-T-5421B, TSOC-16, AN5813 and BS2G.135 and feature heating elements to prevent ice accretion and water ingression for reliable operation in the most adverse environmental conditions.

Product Information & Features:

All probes are customizable to customer requirements

Common plating options available: chrome, dull chrome and electroless nickel

Electrically heated for anti-icing protection. Enhanced dual heat zone in the mast and sleeve.

Multiple voltages available: 12V, 24V, 28V, 115V

Accuracy up to 600 knots

Temperature range -65°C to +70°C

Angle of attack ranges from -40° to 40°

FAA TSO-C16 and Military Approved (TSO-C16a certified probes available)

Industry leading MTBUR

Aircraft Applications:

Chinook CH-47

Cessna Citation

General Atomics Predator

Eurocopter EC135/145

Dash-8

Bell Helicopter 204/206/407/429/430

Boeing Apache

Piper Maibu

Agusta Westland AW609

AEROSONIC Aircraft Pitot...

AEROSONIC manufactures aviation instrumentation and avionics equipment including air data systems, standby displays, digital and mechanical standby instruments, sensors and probes. AEROSONIC has an extensive portfolio of pitot probes (including pitot, pitot static and pitot/angle-of-attack probes) static pressure ports and and stall warning transmitters (SWT) meeting the requirements of virtually any type of aerospace application. A brief presentation of their features and applications is included in the Product Description section. For additional information please contact us.

FALLS FILTRATION (AIRMAZE)...

FALLS FILTRATION TECHNOLOGIES (formerly AIRMAZE) manufactures a wide variety of filters for the industrial and aerospace industries. The AIRMAZE AM01W052261 fuel filter assembly is a FAA PMA fuel filter approved for installation in  the Lake Model LA-4-200 airplane, replacing older Bendix 450-OK fuel filter.

ARROW PNEUMATICS Hydraulic...

ARROW PNEUMATICS offers a complete line of filters, regulators, lubricators, desiccant and sintered bronze products which provide coverage for all markets – PBE, Industrial, Automotive Aftermarket, AG, Heavy Duty, etc. Coverage includes a complete line of desiccant products and air control units, not available through all competitors.

ARROW PNEUMATICS hydraulic in-line filters provide protection for small, high pressure systems up to 3,000 PSI

Using these filters at the pressure side of a pump, foreign particles 25 microns and larger, such as those created by pump wear, are removed before damage can result to the valving in the system. A sintered bronze element ensures protection against crushing should dirt accumulate and increase pressure drop across the element. The unique construction features an anodized aluminum housing for light weight, and a conically shaped sintered bronze element positioned by a retaining spring to allow true, uninterrupted axial flow. Special viton O-rings are available for oil systems where chemical action may be a problem. The standard 25 micron bronze filter element can be easily cleaned or replaced. Nominal filtration ratings of 90, 40, or 10 microns available.

Available in different NPTF sizes.

Maximum operating pressure: 3000 PSI

Operating temperatures: 35 - 200 deg. F

BRP-ROTAX® Aircraft Engine...

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different air filters are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

BRP-ROTAX® Aircraft Engine...

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different oil filters and other oil system parts are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

BRP-ROTAX® Aircraft Engine...

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different fuel filters are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

BRP-ROTAX® Aircraft Engine...

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different spark plugs and plug connector are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

CHALLENGER AVIATION FAA/PMA...

CHALLENGER AVIATION PRODUCTS, Inc. manufactures high quality oil-impregnated, surgical cotton gauze-based aircraft air filters under FAA/PMA certification using K & N filter media. K&N Performance Filters have been well known in the automotive world for years, unsurpassed in airflow and filtering capability they are now one of the most used filters on the road today. Made of a woven cotton fabric instead of paper, the K&N filter medium offers superior filtering without the restriction of airflow presented with paper or foam filters. Fabric allows 50% more air to pass than paper, and almost 60% more than foam. This translates into more horsepower and improved fuel economy.

Based on K&N technology CHALENGER filters have been certified for most general aviation aircraft. Their pleated cotton/wire mesh filters are far less prone to being clogged than synthetic media or paper, and tests done by Challenger (at approximately 240 CFM air flow) show K&N filters typically flow 6.03 CFM as compared to 4.95 for the average pleated paper element and 4.93 CFM for the oil-coated foam variety.

CHALLENGER air filters can be used as replacement parts to other OEM products but an STC (available by CHALLENGER) is required. Air filters come with an application chart, instructions, warranty card and a STC request form which needs to be  filled out for approval for the specific aircraft. The filters comes with a gasket, but do not include the grease which is sold separately, unless otherwise stated.

Product Features:

Can be washed & serviced up to 25 times

Increase horse power 2-4%

Fire Retardant

Save money & improve efficiency

FAA-PMA approved

Ecologically sound

Better take-off and climb-out performance

Faster airspeed and/or better fuel consumption

Accordion fold design provides up to 5 times filtering surface of non-pleated designs

Please refer to the attached documentation on the application of CHALLENGER filters in different aircraft/models.

CHAMPION AEROSPACE FAA/PMA...

CHAMPION AEROSPACE designs and manufactures CHAMPION-brand filters and piston-engine ignition components for both OEM and aftermarket for general aviation aircraft applications.

CHAMPION FAA/PMA Approved Spin-On Oil Filters replace oil filter elements. They are easy to install and save time and clean-up.

Their full-pleat, resin-impregnated micronic filter media traps all harmful particles, including metallic chips which result from abnormal engine wear. Because the oil flows through many layers of locked-in fibers, there is no migration of fiber material to clog engine oil passages or affect bearing surfaces. According to industry-approved tests, the CHAMPION oil filters trap and hold more dirt and harmful particles during their normal operating time than any other similar filters. 

Product Features:

Replacement elements service engine-mounted or line-installed filter systems incorporating a permanent housing assembly.

All sizes of replacement elements are packed 12 per case of a single part number in heavy, re-shippable corrugated-board cartons

Modern spin-on oil filters contain the element, incorporating the anti-drain back valve mechanism (and internal bypass valve 48108-1/48109-1), and are sealed in a disposable housing.

All sizes of spin-on filters are packed 12 per case of a single part number in heavy, re-shippable corrugated-board cartons.

Silicone impregnated filter gasket aids in future removal.

Shorter stud length on CH 48110-1 for tight clearance applications.

Heavy, corrugated steel center tube supports each convoluted pleat of the filter element and produces a substantially higher collapse-pressure rating, twice that of other similar filters.

Maximum full-flow design, without interference from center-bolt oil filter assemblies, provides increased oil filtration each engine-operating hour.

Sold each or in packs of 12 filters per pack.

DONALDSON FAA/PMA Aircraft...

DONALDSON is a leading world-wide filter supplier for commercial jets, military vehicles, off-road equipment, trucks, light-duty vehicles, power plants, dust collectors, industrial compressors and more.The company is the OEM for  FAA-PMA air filters installed in Cessna (all SE piston models), Piper (turbo charged aircraft), Beechcraft,  Maule & Mooney aircraft delivering consistent and reliable performance.

Product Features:

Selection: Over 75 filter models for Cessna, Beech, Maule, Mooney, Piper and other aircraft.

Easy Installation & Maintainance: No removable parts or oil, may be washed with water.

Better Airflow:  In laboratory airflow tests comparing Donaldson, Bracket and Challenger Aviation (K&N) filters for Cessna 172 aircraft, Donaldson had the lowest restriction (best airflow). The reasons for this include:

• Filter media is composed of synthetic fibers

• Evenly distributed uniform size and shape media fibers

• More media area and less frame

• Deeper filter pleats

• No oil

Stop more dirt and protect the engine better: They achieve 98.5% or greater filtration efficiency according to ISO5011 fine and coarse dust requirements, greatly exceeding the other filters. 

Long Lasting: rated to last 500 hours, five to 10 times longer than foam filters. Replacement after three years, five cleanings or 500 flight hours, whichever occurs first.

OEM and FAA-PMA Certified: Designed to manufacturer specifications, Donaldson filters don not require STCs .

Thoroughly Tested: Third party lab tests show Donaldson filters meet or exceed FAA fire safety regulation per FAR 25.853 and FAR 23.1107 Induction system filters.

Please refer to the attached documentation on the application of DONALDSON filters in different aircraft/models.

FALCON AN5812 Series Pitot...

Pitot tubes scan the static and dynamic pressure, and they are used on aircraft to determine the aircraft airspeed. FALCON Non TSO'd (non-certified) pitot tubes have been used for many years on different types of experimental or other aircraft where no certification is required. Available in different heated and unheated versions for 12 or 24 V electical supplies, for vertical or flat installations. Standard (3/4") and long (4") mounting brackets are offered. Heated Material: Stainless Steel. Please consult the supplied documentation or contact us for further information.

FLUITEK Industrial...

FLUITEK CORPORATION manufactures a wide range of industrial filter elements (filters) intended for use as replacements to respective OEM products. They are offered either per piece or in packs of specified number of filters indicated by the number after the letters "PK" in the product reference number (SKU). FLUITEK products are made to meet or exceed OEM specifications. For additional information on FLUITEK prodict portfolio please consult the Product Description Section or contact us.

LENZ Model DB Tank...

LENZ Model DB desiccant breather filters fall under the company's extensive product portfolio of tank accessories. Made from ABS plastic & impact-modified acrylic LENZ tank breather filters remove corrosive water vapor and they are offered in four standard sizes (3" to 10"). Additional characteristics and features include:

• Operating temp. range: -20˚ F to +200˚ F (-28˚ C to +93˚ C)

• Bi-directional air flow

• Silica gel turns from gold to green when maximum absorption is reached

• Dual filter system with anti-static guard

• Solid contaminant filtration surface area 20.6 in2 (133 cm2)

• Silica gel absorbs up to 40% of its weight in water

• Resistant to alkalis, hydrocarbons, non-oxidizing acids, salt water,and synthetic oils

Available options include:

• Activated charcoal media (consult factory)

• 5 PSI Maximum Operating Pressure

For additional information please refer to product images and the attached documentation.

McFARLANE® AVIATION FAA PMA...

McFARLANE® AVIATION manufactures FAA PMA approved fuel quantity transmitters which can be used as direct replacements for originally installed Stewart Warner type fuel quantity transmitters. Use of McFARLANE® AVIATION transmitters eliminates the need for expensive transmitter conversion kits that require replacement of fuel gauges and wiring. They are engineered to be compatible with the original fuel quantity gauge and wiring which uses time proven technology and reliability. Major benefits include higher accurancy, durability, long service life but also significant cost savings as no modifications are required.

McFARLANE® AVIATION fuel quantity transmitters can be sold individually or in kits including the transmitter, gasket(s), and screw/seal assemblies as applicable.

Please consult the supplied documentation for additional information.

PUROLATOR® FACET® FAA-PMA...

FACET® and PUROLATOR® are both brands of MOTOR COMPONENTS, LLC. a manufacturer of electronic fuel pumps  and filtration products. The company is a global leader in the electronic fuel pump industry. FACET® and PUROLATOR® products are known for their high quality and dependability. 

Starting with fuel filters, FACET® and PUROLATOR® filter range has expanded to include oil filters, hydraulic fluid filters, air filters and water filters to their lineup.  FACET® and PUROLATOR® fuel and other aircraft filters have a pleated design to maximize the filtration surface for faster, more efficient filtration. They carry a  FAA-PMA approval and can be used in a variety of aircraft applications providing reliable, long-lasting and proven to work filtration solutions. Sold in pieces or packs of 10 pieces each. They come with Certificate of Conformance as standard. If additional certification is needed, manufacturer's certification and a FAA Export 8130-3 form can be provided with any qualifying filter item at extral cost.  In this case please select listed products with the extension "CERT" in the product reference code (SKU) from our offered items.

CLEVELAND Organic &...

For a number of years CLEVELAND WHEELS & BRAKES offered standard organic & heavy-duty asbestos brake linings for their wheels and brakes. In January 1988 these two types of brake linings were discontinued and a single, improved brake lining was introduced with improved performance and durability compared to older linings. Different versions are available to fit aircraft models based on their year of construction. Brake linings are sold as pad only or as kits together the required number of rivets. Most light aircraft take 2 linings per wheel. Extra rivets are also available. Please refer to the attached Application Guide for additional information.

Switches for Piper Aircraft...

Switches for different functions, inteneded for use in Piper aircraft. Information on their applicability to different Piper aircraft models and serial numbers is included. For additional information and/or non listed switches please contact us.

PTI® TECHNOLOGIES FAA-PMA...

PTI® TECHNOLOGIES designs and produces a wide range of FAA-PMA approved filter elements for Hydraulic Systems, Engine Fuel, Lubrication and Pneumatic Systems as well as Screens and Strainers.

Hydraulic Systems

PTI® TECHNOLOGIES hydraulic filter elements are used in today’s commercial and military aircraft and ground support systems. Filter elements comprised of depth-type filtration media combine high efficiency particle removal while optimizing contamination capacity. Operating environments include pressures up to 5,000 psid and temperatures ranging from -65°F to 350°F. 

Engine Fuel, Lubrication and Pneumatic Systems

PTI® TECHNOLOGIES provides filtration solutions for engine applications ranging from the PT6 to the PW4000 series engines. Applications include fuel, lubrication and pneumatic systems. Filter elements of the constructed of depth-type filtration media or woven wire mesh are offered in both disposable and cleanable configurations.

Screens and Strainers

In addition to pleated filter elements, PTI® TECHNOLOGIES provides screen, strainer and metal edge type filter elements for use in last chance, fuel wash flow, scavenge lube oil and other systems requiring protection for downstream components.

PTI® TECHNOLOGIES filter elements come with Certificate of Conformance as standard. If additional certification (FAA Export Form 8130-3) is needed, an additional charge is applied.  If additional certification is needed, manufacturer's certification and a FAA Export 8130-3 form can be provided with any qualifying filter item at extral cost. In this case please select listed products with the extension "CERT" in the product reference code (SKU) from our offered items.

RAPCO FAA-PMA Approved...

RAPCO manufactures FAA-PMA approved pneumatic filter replacements for airborne assemblies. RAPCO filters are constructed to the highest industry standards. They utilize a 0.3 micron filtration media which provides superior filtration without undue air flow restriction. They help proper filtration of destructive contamination within an aircraft environment (such as system dirt and dust from the cabin and cigarette smoke) which often lead to the need for replacement of expensive gyro instruments & other components.  When changed on a scheduled basis they can reduce operating costs. 

RAPCO FAA-PMA approved RA-B3-5-1 Garter Filter Element is a filter replacement part for use on Airborne 133 & 2H3 series regulators and 1J1 series filter assemblies.

Product Specifications:

Garter Filter Element

Polyurethane foam, 1” long x 1-3/4” diam. 

For use on Airborne 133 & 2H3 series regulators and 1J1 series filter assemblies.

Recommended Replacement: 100 hours/ 1 year

RAPCO FAA-PMA approved D-9-18-1 Central Air Filter Element replacement is intended for use with Airborne 1J7-1 filter assembles, for vacuum systems

Product Specifications:

Central Air Filter Element.

Pleated filter, screen with bonded rubber end seals. 

3-1/4” long x 2-7/8 diam. 

For use with Airborne 1J7-1 filter assembles, for vacuum systems

Recommended Replacement: 500 hours/ 1 year

Note: 

The products are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed (depending on the ordered item) please mention this during the order placement. In this case. Additional charges may apply.

RAY ALLEN COMPANY (RAC) G3...

The G3 Series Stick Grips by RAY ALLEN COMPANY (RAC) includes four different models: G301, G303, G305 and G307. All feature four individual SPDT momentary contact switches to control one or two axis electric trim. The switches are triggered via a traditonal 4-way "hat" type activator. These switches are high quality with 15 amp Honeywell microswitches for their superior tactile characteristics. The slotted one or two axis faceplates also adds to the very positive switching action. The four trim switches can be wired directly to Ray Allen servos, eliminating the need to wire relays in the trim system when one grip is used. However, if two grips are used, either relays or a switch to transfer the control of trims from one grip to the other will be needed. The hand grip itself is made out of a very strong BASF composite that has excellent UV resistance. The entire grip has a textured finish. The G3 grips are 6.5” (165 mm) tall. All G3 grips feature a momentary contact, SPDT Push-To-Talk (PTT) switch located on the front side of the grip. A black faceplate is included with each grip. Gray and tan faceplates are also available. All Ray Allen  Stick Grips are designed to fit any stick size up to 1 1/8” in diameter with the use of spacers. Three spacers will be included with each grip enabling easy installation on 3/4”, 7/8” and 1” sticks. The stick grips include pre-cut and stripped 26 gage teflon insulated 19 strand wire. A die-cut label sheet with 50 different labels is supplied with all G3 grips. The labels are lexan coated for long service life and fit in their own recesses for a professional appearance.

All G3 Series Stick Grips feature:

- four individual SPDT momentary contact switches to control one or two axis electric trim. The switches are triggered via a traditonal 4-way "hat" type activator. The four trim switches can be wired directly to Ray Allen servos.

- high quality switches with 15 amp Honeywell microswitches for superior tactile characteristics. 

- slotted one or two axis faceplates. A black faceplate is included. Gray and tan faceplates are also available. 

- the G301 comes with a PTT switch and blank faceplates

- the G303 has two trim switches, a faceplate slotted vertically for one-axis trim and a PTT switch

- the G305 stick grip has four trim switches, a faceplate slotted vertically and horizontally for two-axis trim and a PTT

 -the G307 stick grip has four trim switches, a faceplate slotted vertically and horizontally for two-axis trim, a PTT switch and two additional SPDT momentary contact pushbutton switches. The pushbutton switches can be replaced with four different style toggle switches.

TEMPEST® SPIN EZ® FAA/PMA...

Tempest® Spin EZ® FAA PMA approved aviation oil filters are manufactured by Aero Accessories®, LLC. Apart Spin-EZ® gasket oil filters the company also manufactures other pneumatic products such as Tornado™ dry air pump.

Product Features:

Improved Nut Welds – Nut welds are so strong that the can will distort without breaking the welds.Tempest Original filters can be installed without the danger of installation nuts falling off.

Improved By-Pass Valve for Continental® Engines – Meets TCM by-pass specification of 12-14 psi, reducing risk of premature bypass that can result in unfiltered oil flowing to your engine.

PC Housing (Patent Pending) – the only filter to incorporate a housing for the by-pass valve to prevent the restriction of the oil outlet should a failure of the by-pass valve occur.

Burst strength of 600 psi – Significant improvements to the roll seam process used on the bottom of the can substantially improved the design burst strength of the Tempest Spin EZ oil filter to over 600 pounds per square inch, exceeding the ARP 1400 standard by 50 percent. Extra strength gives added assurance that Tempest oil filters are made to withstand the harshest operating conditions.

Full Pleat Media – The resin-impregnated, cellulosic, full pleat media is designed for uniform flow and collapse resistance.  312 square inches is the most in aviation oil filters.

Tempest® Spin EZ® oil filters are sold individualy but also offered as economical, convenient, and easy to handle six and twelve packs. Spin EZ® Solid Lubricant, aTempest Spin EZ oil filter’s proprietary solid lubricant is also available allowing for easy removal of the filter. Unlike oil, grease or DC4 compound that leave the filter seemingly “bonded” to the engines mount pad, making it nearly impossible to remove, Tempest® Spin EZ solid lubricant won't extrude or squirt out from under the seal.

PLease consult the supplied documentation for additional information.

UNIFRAX® FIBERFRAX® Ceramic...

UNIFRAX® is the largest ceramic fiber producer worldwide with in-house paper-making capabilities. UNIFRAX® products include FIBERFRAX®Ceramic Fiber Insulation Blankets (S Durablanket 2300F and 2600F, Fibermax Blanket 3000F), FIBERFRAX® Ceramic Fiber Insulation Papers in different grades, FIBERFRAX® Ceramic Fiber Insulation Boards (Duraboard LD and HD 2300F, Duraboard 2600F and 3000F), FyreWrap Insulation Ducts (Elite Grease, Elite Air Distribution System (ADS), Dryer Protection System (DPS), Plenum and Cable) and High Temperature Textiles (Ceramic Cloths 2300F, Ceramic Tapes 2300F, Ceramic Square and Round Braids 2300F, Ceramic Twisted Ropes 2300F, Silica Textiles 2000F and Fiberglass Textiles 1000F. UNIFRAX® products are distributed by Thermal Products Company, Inc.

For FIBERFRAX® Ceramic Fiber Insulation Papers please consult the Product Description section and supplied documentation. Other products can also be supplied on demand. Please contact us.

Aircraft Static Pressure...

Static ports are located on the side of an aircraft and function as small air inlets. Their purpose is to measure static air pressure, also known as barometric pressure. The pressure within the static port is collected and then utilized by the altimeter and the vertical speed indicator (VSI). Different static ports are offered, both certified and non certified (the latter with an intended use in homebuilt/experimental aircraft).

Several offered non certified static ports are briefly described below. For certified static ports plese refer to their separate product presentations.

Aluminum Cessna Type

Aluminum single engine Cessna type static port. Externally mounted through a 19/64” hole. Can be used on fabric, composite or aluminum. No need for rivets. 1-3/8” dia.x1” depth.

Aluminum 15160

Aluminum static port for external mounting through 1/4" diameter hole in side of the fuselage. Base has 1/8" NPT female port for connecting to static line (polyethylene fitting included). Installation with 3/32" diameter flush rivets.

Aluminum 15161

Aluminum static port for external mounting through 1/4" diameter hole in side of the fuselage. Base has 1/8" NPT female port for connecting to static line. Installation with 3/32" diameter flush rivets.

Aluminum 15176

Aluminum static port externally mounted in a 1-1/4" base OD outside of the fuselage through 5/16" ID hole. Installation with 4 countersunk 3/32" rivets to skin with pal nuts & lock washers on inside.