Anchor Nuts

Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners used in blind mounted panel applications, where hex nuts cannot be used or an attached nut is required for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

Sourced from quality manufacturers,anchor nuts are offered either as part of AVIATIONEU NEW ERA product portfolio or as OEM products . They come in Fixed or Floating types, different materials & finishes (*), single/double lug versions, Metric (M3 - M12) οr Unified thread sizes (**) and meet military or industrial specifications (***). Genrally sold in pieces but packs are also used. In the case of packs,  the specified number of anchor nuts per pack is indicated after the letters "PK" in our product reference number (SKU). Appearing prices are always for the units of measurement used each time.

(*) INCONEL alloy, CRES A-286 alloy, C1050 heat treated carbon steel or other steel alloys depending on the supplier. 

INCONEL is a registered trademark of Special Metals Corporation for a family of austenitic nickel-chromium-based superalloys. They belong to the family of austenitic nickel-chromium-based superalloys, oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. 

CRES A-286 alloy is iron-nickel-chromium based austenitic iron based material with additions of molybdenum and titanium  known for its good strength and oxidation resistance especially at temperatures up to 1300°F (700°C). It  is used in various components, such as aircraft and industrial gas turbines due to is high strength and superior fabrication. Alloy A286 characteristics include good machinability and oxidation resistance up to 800°C, very high corrosion resistance, high mechanical properties and strengths well retained up to 700°C and others.

(**) Metric ISO thread (M ) standard in Europe. Designated by the letter M followed by the value of the nominal diameter (the max thread diameter) and the pitch separated by the sign “x”, both expressed in millimetres. Unified form thread designations, such as UNC (unified coarse) or UNF (unified fine), have a fixed number of threads per inch with the thread major diameter preceding the designation (e.g. 9/16”UNC or 9/16”UNF). UNC is the most commonly used for general purpose applications but UNF threads have a slightly higher breaking load capacity than the UNC.

(***) There is currently no military specification for Metric nut plates.

For additional information please refer to the respective product presentations or contact us.

Anchor Nuts

There are 23 products.

Showing 1-23 of 23 item(s)

Active filters

AVIATIONEU NEW ERA Mil Spec...

Anchor nuts (aka nut plates) are designed for blind mounted applications where it is impractical to use hex nuts. Sourced from quality manufacturers, a range of nut plates comlying with different Military Specifications are offered as part of AVIATIONEU NEW ERA product lines. They come in Unified thread sizes (*), Standard and Miniature versions, different types (fixed or floating, one lug, two lugs, corner, etc.) and various materials & finishes to meet application requirements. For more information and specifications of different MS series nut plates please refer to individual product presentations. Respective Non Military (Commercial) anchor nuts, meeting DIN, ISO and other standards, both in Metric (M3 - M12 diameters) and Unified thread types are also available from AVIATIONEU NEW ERA product portfolio. All AVIATIONEU NEW ERA anchor nuts are competitively priced and are cost effective alternatives to the respective OEM parts. They are sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time.Please refer to product specifications or contact us.

(*) There is currently no military specification for Metric nut plates.

AVIATIONEU NEW ERA...

Extending the range of nut plates (*) comlying with different Military Specifications, anchor nuts for industial (non military) uses are offered as  part of AVIATIONEU NEW ERA product lines. Also known as Commercial anchor nuts, they meet DIN, ISO and other standards and are available in Standard and Miniature versions, different types (fixed or floating, one lug, two lugs, corner, etc.), various materials (**) & finishes and in both in Metric (M3 - M12 diameters) and Unified thread types (***). Competitively priced, AVIATIONEU NEW ERA industrial nut plates are cost effective alternatives to the respective OEM parts. They are sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. Please refer to product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners used in blind mounted panel applications, where hex nuts cannot be used or an attached nut is required for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

(**) INCONEL alloy, CRES A-286 alloy,42CrMo4 Steel, C1050 heat treated carbon steel or other steel alloys depending on the manufacturer.

(***) Metric ISO thread used in Europe. Designated by the letter "M" followed by the value of the thread nominal diameter and pitch in millimetres. Unified form thread designations,such as UNC (unified coarse) or UNF (unified fine),have a fixed number of threads per inch with the thread major diameter preceding the designation.

HOWMET AEROSPACE (ALCOA...

ALCOA FASTENING SYSTEMS (ALCOA), a business unit of  HOWMET AEROSPACE, is one of the largest manufacturers of aerospace hardware in the world. HOWMET AEROSPACE SIMLOC® Metric (*) Anchor Nuts, both fixed and floating, are manufactured from cadmium plated steel alloy unless otherwise specified and offered in standard and miniature versions, different types (e.g. one lug, two lugs) and specifications to meet application requirements. Please refer to individual products and specification data provided or contact us for additional information.

(*) Metric threads are designated by the letter M followed by the nominal major diameter of the thread and the pitch in millimeters. For example M10 x 1.0 indicates that the major diameter of the thread is 10mm and the pitch is 1.0mm. 

AVIATIONEU NEW ERA NAS1474...

NAS1474 series floating nutplates (*) allow for a stronger, more secure hold when installing bolts on thin or unstable surfaces. The nutplates are capped, meaning the end of the bolt will be completely protected. NAS1474 series floating nutplates  are similar to those of NAS1473 series (see separate presentation) but with reduced rivet space. Both are are manufactured from cadmium plated steel or corrosion resistant (stainless) steel (CRES). They are offered as part of our own branded (AVIATIONEU NEW ERA) product lines  in different thread sizes and dimensions in inches and come with or without lubrication. The following letters in their part numbers indicate their composition and lubrication ("K" indicates need for stiffening flange).

A - Cad plated Steel Nut & Shell with Aluminum Alloy or Steel Washer, Fuel Resistant Seal 225 deg. F,Dry Film Lubricated 

X - Same as A without Dry Film Lubricant 

S - Cad plated Steel Nut Shell & Washer, Fuel Resistant Seal 350 deg. F,Dry Film Lubricated 

Y - Same as S without Dry Film Lubricant 

C - CRES Nut silver plated Shell & Washer, Non-Fuel Resistant Seal 450 deg. F

R - CRES Nut Shell & Washer, Fuel Resistant Seal 225 deg. F,Dry Film Lubricated 

F - CRES Nut Shell & Washer, Fuel Resistant Seal 350 deg. F, Dry Film Lubricated 

Note (*): also termed as plate nuts, anchor nuts or anchor plates

AVIATIONEU NEW ERA NAS1473...

NAS1473 series floating nutplates (*) allow for a stronger, more secure hold when installing bolts on thin or unstable surfaces. The nutplates are capped, meaning the end of the bolt will be completely protected. NAS1474 series floating nutplates (see separate presentation) are similar to those of NAS1473 series but with reduced rivet space. Both are are manufactured from cadmium plated steel or corrosion resistant (stainless) steel (CRES). They are offered as part of our own branded (AVIATIONEU NEW ERA) product lines  in different thread sizes and dimensions in inches and come with or without lubrication. The following letters in their part numbers indicate their composition and lubrication ("K" indicates need for stiffening flange).

A - Cad plated Steel Nut & Shell with Aluminum Alloy or Steel Washer, Fuel Resistant Seal 225 deg. F,Dry Film Lubricated 

X - Same as A without Dry Film Lubricant 

S - Cad plated Steel Nut Shell & Washer, Fuel Resistant Seal 350 deg. F,Dry Film Lubricated 

Y - Same as S without Dry Film Lubricant 

C - CRES Nut silver plated Shell & Washer, Non-Fuel Resistant Seal 450 deg. F

R - CRES Nut Shell & Washer, Fuel Resistant Seal 225 deg. F,Dry Film Lubricated 

F - CRES Nut Shell & Washer, Fuel Resistant Seal 350 deg. F, Dry Film Lubricated 

Note (*): also termed as plate nuts, anchor nuts or anchor plates

AVIATIONEU NEW ERA...

Floating nut plates are low profile and lightweight plates used to install a captive nut behind a panel. The floating nut allows for an assembly that is not perfectly aligned. 

MS21075/MS21076 Series nut plates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers they are are floating self-locking, two lug, low height,reduced rivet spacing nut plates.

Those included in MS21075 series are manufactured from cadmium plated carbon steel while the MS21076 nut plates are produced from corrosion resistant steel (CRES). They are available in different Unified thread sizes, with or without eyelets and come with or without a dry film lube. Nut plates with a dry film lube are specified by the letter "L" in the part number. The letter “E” at the end of the part number denotes a nutplate with eyelets while the letter “N” denotes a nutplate  without eyelets.

Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

AVIATIONEU NEW ERA...

MS21073/MS21074 Series nut plates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers they are fixed self-locking, low height corner miniature nut plates. Those included in MS21073 series are manufactured from cadmium plated carbon steel while the MS21074 nutplates are produced from corrosion resistant steel (CRES). They are available in different Unified thread sizes, with plain or countersunk rivet holes on each side and come with or without a dry film lube.

Nut plates with a dry film lube are specified by the letter "L" in the part number. Nut plates with countersunk rivet holes are specified by the letter "K" at the end of the part number.

Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

AVIATIONEU NEW ERA...

MS21071/MS21072 Series nut plates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers they are fixed low height self-locking, one lug, reduced rivet spacing miniature nutplates. Those included in MS21071 series are manufactured from cadmium plated carbon steel while the MS21072 nutplates are produced from corrosion resistant steel (CRES). They are available in different Unified thread sizes, with plain or countersunk rivet holes on each side and come with or without a dry film lube. MS21071/MS21072 Series are superseded by NASM21071/NASM21072 series respectively.

Nut plates with a dry film lube are specified by the letter "L" in the part number. Nut plates with countersunk rivet holes are specified by the letter "K" at the end of the part number.

Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

AVIATIONEU NEW ERA...

Floating nut plates are low profile and lightweight nut plates used to install a captive nut behind a panel. The floating nut plate (aka anchor nut) allows for an assembly that is not perfectly aligned. 

MS21061/MS21062 Series nut plates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers they are floating low height self-locking, one lug  anchor nuts. Those included in MS21061 series are manufactured from cadmium plated carbon steel while the MS21062 nutplates are produced from corrosion resistant steel (CRES). They are available in different Unified thread sizes, with plain or countersunk rivet holes on each side and come with or without a dry film lube. 

Nut plates with a dry film lube are specified by the letter "L" in the part number. Nut plates with countersunk rivet holes are specified by the letter "K" at the end of the part number.

Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

AVIATIONEU NEW ERA...

Floating nut plates are low profile and lightweight nut plates used to install a captive nut behind a panel. The floating nut plate (aka anchor nut) allows for an assembly that is not perfectly aligned. 

MS21059/MS21060 Series nut plates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers they are floating low height self-locking, two lug  anchor nuts. Those included in MS21059 series are manufactured from cadmium plated carbon steel while the MS21060 nutplates are produced from corrosion resistant steel (CRES) and silver plated. They are available in different Unified thread sizes, with plain or countersunk rivet holes on each side and come with or without a dry film lube. 

Nut plates with a dry film lube are specified by the letter "L" in the part number. Nut plates with countersunk rivet holes are specified by the letter "K" at the end of the part number.

Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

AVIATIONEU NEW ERA...

MS21055/MS21056 Series nut plates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers they are fixed self-locking, low height corner nut plates.  MS21055 series nut plates are manufactured from cadmium plated carbon steel while MS21056 nut plates are produced from corrosion resistant steel (CRES). They are available in different Unified thread sizes, with plain or countersunk rivet holes and come with or without a dry film lube. Nut plates with a dry film lube are specified by the letter "L" in the part number. Nut plates with countersunk rivet holes are specified by the letter "K" at the end of the part number.

Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

AVIATIONEU NEW ERA...

MS21051/MS21052 Series nut plates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers they are fixed self-locking, low height, one lug, standard rivet spacing nut plates.  MS21051 series nut plates are manufactured from cadmium plated carbon steel while MS21052 nut plates are produced from corrosion resistant steel (CRES). They are available in different Unified thread sizes, with plain or countersunk rivet holes and come with or without a dry film lube. Nut plates with a dry film lube are specified by the letter "L" in the part number. Nut plates with countersunk rivet holes are specified by the letter "K" at the end of the part number.

Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

AVIATIONEU NEW ERA...

MS21049/MS21050 Series nut plates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers they are low height fixed self-locking two-lug reduced rivet spacing nut plates.  MS21049 series nut plates are manufactured from cadmium plated steel while those in MS21050 series are produced from corrosion resistant steel and silver plated. They are available in different Unified thread sizes, with plain or countersunk rivet holes on each side and come with or without a dry film lube. Nut plates with a dry film lube are specified by the letter "L" in the part number. Nut plates with countersunk rivet holes are specified by the letter "K" at the end of the part number.

Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

AVIATIONEU NEW ERA...

MS21048/NAS680 Series nutplates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers these low height fixed self-locking two-lug nutplates are made from corrosion resistant steel (CRES) with a passivated finish. They are same as those of MS21047 series except that they are made from stainless steel 450F or 800F with silver plating. They have a nylon insert and are available in different Unified thread sizes, with plain rivet or countersunk rivet holes on each side and come with or without a dry film lube. MS21048 nutplates supercede AN362, AN366, NAS680  and are superseded by NASM21048 series.

Nutplates with a dry film lube are specified by the letter "L" in the part number.

Nutplates with countersunk rivet holes are specified by the letter "K" in the end of the part number.

Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

AVIATIONEU NEW ERA...

Sourced from quality manufacturers and offered as part of AVIATIONEU NEW ERA product lines, MS21047 Series Anchor Nuts (Nut Plates) (*) are fixed self locking elastic insert 2-lug nut plates made of cadmium plated steel with nylon insert and plain rivet holes. They come in different Unified thread sizes to meet application requirements and replace respective AN366F series nut plates. Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

HOWMET AEROSPACE (ARCONIC)...

A plate nut, also known as a nut plate, anchor nut or anchor plate, is a stamped sheet metal nut that is usually riveted to a workpiece. They have a long tube that is internally threaded and a plate with two clearance holes for rivets. These terms are used interchangeably throughout product presentations to describe respective products.

Floating nut plates are low profile and lightweight plates used to install a captive nut behind a panel. The floating nut allows for an assembly that is not perfectly aligned. These lightweight, low-profile nut plates are designed for blind mounted applications where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. F5000/MS21059 Series floating  two-lug nut plates by HOWMET AEROSPACE (ARCONIC) are made of C1050 carbon Steel per AMS5085 or 8740 alloy steel per AMS6322. They are cadmium plated per AMS-QQ-P-416, Type II with dry film lubricant (F5000) or carbowax (F5000-CW). They are superseded by NASM21059 series.

Certification Details:

MS21059J, MILITARY SPECIFICATION SHEET: Nut, Self-Locking, Plate, Two Lug, Floating, Low Height Steel, 125 KSI FTU, 450 Deg. F (01 Feb 1994) [Superseded by NASM21059].

HOWMET AEROSPACE (ARCONIC)...

A plate nut, also known as a nut plate, anchor nut or anchor plate, is a stamped sheet metal nut that is usually riveted to a workpiece. They have a long tube that is internally threaded and a plate with two clearance holes for rivets. These terms are used interchangeably throughout product presentations to describe respective products.

MF5000/MS21075 Series Μiniature floating two-lug nut plates by HOWMET AEROSPACE (ARCONIC) are made from carbon steel and cadmium plated. Similar to F5000/MS21059 Series but with a reduced rivet spacing. They are superseded by NASM21075 series.

Certification Details:

MS21075H, MILITARY SPECIFICATION SHEET: Nut, Self-Locking, Plate, Two Lug, Floating, Low Height, Reduced Rivet Spacing, Steel, 125 KSI FTU, 450 Deg. F (28 Feb 1995) [Superseded by NASM21075].

HOWMET AEROSPACE (ARCONIC)...

K1000 series (full size) and MK1000 series (Miniature) fixed self-locking two-lug nut plates by HOWMET AEROSPACE (ARCONIC) are made from cadmium plated carbon steel and are offered in different thread sizes, with plain rivet or countersunk rivet holes, with or without a dry film lube. Nut plates with a dry film lube are specified by the letter "L" while those with countersunk rivet holes are specified by the letter "K" in the end of the part number. They comform with MS21047, NAS680, NAS1023A specifications. MS21047 nut plates are superseded by NASM21047 series. For additional information, please refer to the product specifications or contact us.

Certification Details:

MS21047F, MILITARY SPECIFICATION SHEET: Nut, Self-Locking, Plate, Two Lug, Floating, Low Height Steel, 125 KSI FTU, 450 Deg. F (01 Feb 1994) [Superseded by NASM21047].

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

AVIATIONEU NEW ERA...

Sourced from quality manufacturers and offered as part of AVIATIONEU NEW ERA product lines, MS21069/MS21070 Series are fixed self-locking, two lug, reduced rivet spacing low height miniature nut plates (*). MS21069 series nut plates are made from cadmium plated steel while those of MS21070 series from corrosion resistant steel (CRES). They come in different Unified Thread sizes with plain or countersunk rivet holes on each side,  with or without a dry film lube. 

Nut plates with a dry film lube are specified by the letter "L" in the part number while those with countersunk rivet holes are specified by the letter "K" at the end of the part number. 

MS21069/MS21070 Series are superseded by NASM21069/NASM21070 series respectively. Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are sold in pieces, usually in packs where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are per piece. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

AVIATIONEU NEW ERA MS21078...

Sourced from quality manufacturers and offered as part of AVIATIONEU NEW ERA product lines, MS21078 Series Nut Plates are are fixed self locking 2-lug nut plates with elastic insert and plain rivet holes (*). Made from cadmium plated steel 

 they are available in different Unified thread sizes and replace respective AN366F series nut plates. Competitively priced, these anchor nuts are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

Aircraft General Standards...

Aircraft General Standards (AGS) were issued by the Directorate of Technical Development of the Air Ministry from the 1920’s and persist till today through substitutions to British Standards and AGS revisions. They relate to fasteners  such as bolts, nuts, rivets, fork joints, taper pins, common to all types of aircraft. AGS fasteners are made in a range of sizes and different materials. In their identification system AGS parts are listed in sequential number, eg AGS 500, AGS 501 even though the number does not generally group common parts together nor does it follow a specific chronological order. Special parts made for specific aircraft have no marking to indicate size or material, but are marked with a part number.

Anchor nuts (aka nut plates) included in this product presentation are designed for blind mounted applications where it is impractical to use hex nuts. Stiffnuts, in particular, feature a very high friction between the threads of the nut and the bolt so that the nut may be considered self-locking. Several types of stiffnuts have been designed for use on aircraft.

AGS 2007 series relates to double anchor stiffnuts (Thick) while those in AGS 2008 and 2009 series relate to thin and countersunk stiffnuts.

ASG 2007 stiffnuts can be supplied in limited quantities from surplus stocks of our co-operating suppliers, mainly as special order non refundable and non-returnable items.  Please refer to product specifications or contact us.