Control Cables & Fixtures

Control Cables & Fixtures

There are 8 products.

Showing 1-8 of 8 item(s)

Active filters

McFARLANE MS20664C Series...

Stainless Steel Single Shank Ball for swaging on to wire rope and aircraft cable. Used to terminate aircraft cable ends. Conforms to Mil Specification MS20664C. Available in different breaking strengths (lbs), hole diameters (in.) and for differnt cable sizes (in.).

SA110/BA3 Series Plain Ball...

The BA3 Series of plain ball end fittings meet all requirements for Boeing’s BACT14B Plain Ball End Fittings and NAS494 series Plain Ball End Fittings. All balls are manufactured from stainless steel as specified in MIL-DTL 781 and are certified to the appropriate standard(s). Available in different breaking strengths (lbs), sphere diameters (in.) and for differnt cable sizes (in.).

MS2151/AN155 Series...

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to accommodate the locking clips. After the proper cable tension is reached the barrel slots are aligned with the terminal slots and the clips are inserted. The curved ends of the locking clips expand and latch in the vertical slot in the center of the barrel. They are available for different cable diameters and thread sizes in inches covering desired minimum breaking strength requirements.Different turnbuckle components are used in turnbuckle assemblies. They are sold separately to meet application requirements. Please refer to the attached documentation.

Stainless Steel Aircraft...

In contrast to the commercial cables, aircraft  cables are lubricated providing substantially better fatigue life. They undergo extensive testing and are certified MIL-DTL-83420 and QPL specifications. Available in galvanized or stainless steel versions, diameters in inches, strengths and methods of construction (7X7, 7X19 or 1X19). The strength units are lbs. Unit of measure and sale is feet. 

Galvanized Steel Aircraft...

In contrast to the commercial cables, aircraft  cables are lubricated providing substantially better fatigue life. They undergo extensive testing and are certified MIL-DTL-83420 and QPL specifications. Available in galvanized or stainless steel versions, diameters in inches, strengths and methods of construction (7X7, 7X19 or 1X19). The strength units are lbs. Unit of measure and sale is feet. 

AVIATIONEU NEW ERA Aircraft...

Aircraft cables are stranded wires used in a wide variety of applications on or around the aircraft including flight control surfaces and tie-downs or other purposes. The term "wire rope" is also used when the diameter is larger than 3/8 inch (9.52 mm), with smaller gauges designated as cables or cords. They are specified by the number of strands times the number of wires in each strand. For example, “7x19” means the cable has seven (7) strands, with 19 wires in each strand. 7x19 is the most flexible aircraft cable construction, approximately twice as flexible as 7x7 construction.

AVIATIONEU NEW ERA aircraft ropes/cables feature smooth finish, corrosion resistance and high load bearing strength. They feature a tensile strength of 1570-1960 MPA, are sourced by certified manufacturers, competitively priced and offered in the common construction types (1X7, 7x17, 1x19, 7x19 ) in Galvanized or Stainless Steel, different diameters ( 9 -12mm for cables, 5-52 mm for ropes) and cut to order lengths in meters. Unit of measure and sale is the meter and the Minimum Order Quantity (MOQ) is 500 meters.  Appearing price is for reference only per meter. Please contact us for a quotation.

AVIATIONEU NEW ERA Wire...

AVIATIONEU NEW ERA wire rope slings complements our range of wire cables/ropes providing mechanically spliced, hand spliced or socket robustly manufactured slings made from high grade 1770/1960 raw material. Hand and mechanically spliced slings are offered in different eye/loop types (soft,hard,plain thimble,solid thimble) in different diameters up to 60 mm. The hand spliced slings are of different contruction types (6X19,7X19,6X7) and feature sturdiness, strong construction, long service life and dimensional accuracy. They are offered as galvanized, UN galvanized, and stainless steel and can be used with different fittings (ring, hook, D shackle, turnbuckle). The mechanically spliced  galvanized steel and stainless steel slings are aasy to use, of different contruction types (6X7,7X7,6X19,7X19,6X37,7X37,6X36,7X36) and feature corrosion resistance, high strength and long service life.  The slings with socket from stainless steel are offered in  diameters 5-10 mm in plain eye, hard loop and plain thimble eye/loop types. Sold by the piece with Minimum Order Quantity (MOQ) 100 pieces.  Appearing price is for reference only per piece. Please contact us for a quotation.

MS21252/AN161 Series...

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to accommodate the locking clips. After the proper cable tension is reached the barrel slots are aligned with the terminal slots and the clips are inserted. The curved ends of the locking clips expand and latch in the vertical slot in the center of the barrel. They are available for different cable diameters and thread sizes in inches covering desired minimum breaking strength requirements. Different turnbuckle components are used in turnbuckle assemblies. They are sold separately to meet application requirements. Please refer to the attached documentation.