Filter By

Pipes, Tubing, Hoses & Fittings

Pipes, tubes, hoses, ductings, sleeves and related AN & MS fittings, brass tube, plastic tube or other variety of fittings for different uses.

Pipes, Tubing, Hoses & Fittings

There are 48 products.

Showing 1-15 of 48 item(s)

Active filters

ROTAX Aircraft Engine Hose...

Different hoses for ROTAX engines including water, heat, air intake, protection, form, connecting, low pressure and others. Available as Certified and Non Certified parts from the manufacturer. Sold each or in meters (indiacted by the letter "m" in product title).

MIL-DTL-6000D Series...

MIL-DTL 6000D Soft Flexible Aircraft Fuel, Oil, Water & Alcohol Rubber Hose. Burst PSI: 1000. They replace the respective MIL-DTL 6000C hoses and are available in different internal and outer diameters in inches. Priced and sold by the foot.

EATON AEROQUIP 303 Series...

Standard hose used in medium pressure A/C hydraulic, fuel, oil and coolant systems. Available in different tubing sizes and internaldiameters in inches. Priced and sold by the foot.

EATON AEROQUIP 601/AE701...

Aeroquip 601/AE701 is a direct replacement for old 601 hose widely used for aircraft fuel and oil lines where flexibility and light weight are prime considerations. Available in different tubing sizes and internal diameters in inches. Priced and sold by the foot.

EATON AEROQUIP 491 Hose...

Aeroquip 491 and 471 hose fittings consist of an AN818 style nut, an externally threaded 37 nipple and an internally threaded hose socket. Fittings of sizes 3 through 6 have nuts and nipples of cadmium plated steel. Nuts and nipples for size 8 and larger are of anodized aluminum. Fittings conform to MS24587. Available in different tube and thread sizes in inches.

EATON AEROQUIP AE102...

Aeroquip Firesleeve was specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75. It can be used for all fuel, oil, hydraulic, fire extinguisher & propeller feathering lines. This firesleeve can be indentified by its orange colored outer surface. It functions effectively within a continuous operating temperature range of -65 degree to +450 degree. Available in different internal diameters in inches. Sold by the foot.

VENA HT Series Flexible...

VENA® HT Series flexible  hoses (SCAT equivalent) are  made of one layer of glass fabric silicone coated and visible steel wire  spiral inside. For use in conducting extremely cold or hot air (temperature range: -65°F to +550°F). Available in different internal diameters in inches. Sold by the foot.

EATON AEROQUIP FC300 Series...

Hydraulic AQP elastomer hose with polyester inner braid, single wire braid reinforcement and blue polyester cover.Used in different high temperature/ high pressure fluid applications for power steering lines, hydraulics handling petroleum base fluids and air, gasoline, fuel and lubricating oils, fire resistant hydraulic fluids and other industrial fluids. Priced and sold by the foot.

EATON AEROQUIP Carbon Steel...

EATON AEROQUIP 2" carbon steel adapter, female NPT swivel to male NPT straight pipe. Thread: 2-11-1/2".  Zinc plated for strength, durability, and resistance to corrosion. Complies with SAE 140130 standard. Available in multiple sizes. Sold individually.

Fitting...

SAE-AS5174/MS24392/AN815 series union, flared tube fittings are available in different materials, tube outer diameters and thread sizes in inches. AN815 series fittings are superseded by the respective fittings of SAE International, standard AS5174 series.

Materials include: Carbon Steel, Aluminum Alloy, Corrosion Resistant Steel (CRES), Titanium Alloy.

The following Code Letters after the AS5174 indicate the composition of the fitting while the remaining digits in the Part Number indicate the fitting dimensions in inches.:

No code letter in part number for Carbon Steel

Code letter “D” for Aluminum Alloy (except 7075-T73)

Code letter “J” for CRES, type 304

Code letter “K” for CRES, type 316

Code letter “R” for CRES, type 321

Code letter “S” for CRES, type 347

Code letter “T” for Titanium Alloy 6AL-4V

Code letter “W” for Aluminum Alloy 7075-T73

Code letter “Z” for Carbon Steel, Zinc plated

For example, AS5174D0606 union fitting is made from Aluminum Alloy with a tubing outer diameter (O.D.) 3/8" and a 0.5625-18 UNJF thread. The corresponding union fitting in AN832 series would be AN815-6D.

AN Fitting AN816 Aluminum...

AN816 nipple fitting is available in steel or aluminum in different tube outer diameters and pipe sizes in inches. Aluminum fittings are designated by the letter "D" after the suffix number.

AN816 Steel Nipple, Flared...

AN816 nipple  fitting is available in steel or aluminum in different tube outer diameters and pipe sizes in inches. Aluminum fittings are designated by the letter "D" after the suffix number.

AN Fitting AN822/MS20822...

AN822/MS20822 90° elbow fitting is available in steel or aluminum in different tube outer diameters and thread sizes in inches. Aluminum fittings are designated by the letter "D" after the suffix number.

AN Fitting AN822/MS20822...

AN822/MS20822 90° elbow fitting is available in steel or aluminum in different tube outer diameters and thread sizes in inches. Aluminum fittings are designated by the letter "D" after the suffix number.