5052 Aluminum Alloy (AL5052) Bars/Rods

AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. It is  frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and other equipment, pressure vessels, treadplate, containers, and applications. Although It is non heat-treatable, it is the highest strength alloy of the more non-heat-treatable grades. Its resistance to fatigue is better than most grades of aluminum. Alloy 5052 has a good marine atmosphere corrosion resistance of saltwater and excellent workability. This alloy is comparable to the 6061 aluminum alloy (AL6061). Their main features are listed below:

Aluminum 5052: Non heat-treatable, Excellent weldability, High corrosion resistance, Smooth surface, Lightweight, High-tensile strength.

Aluminum 6061: Heat-treatable, Excellent machinability, Excellent corrosion resistance, Semi-smooth surface, Lightweight, High-tensile strength.

AL5052 bars/rods are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other grade aluminum and steel alloys (e.g. AL2024, AL6061, AL7050, AL7075, ST4130, ST4140 etc.). Sourced from quality producers, they are available in different shapes, (such as round, rectangular, square and others), tempers, specifications, diameters/thicknesses, pre-cut or cut-to-oder lengths depending on the order quantity and requirements. For additional information, please refer to our Brief Guide on Aluminum Grades & Temper Designations,  the individual product presentations or contact us.

5052 Aluminum Alloy (AL5052) Bars/Rods

There are 4 products.

Showing 1-4 of 4 item(s)

Active filters

AVIATIONEU NEW ERA 5052...

AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. It is  frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and other equipment, pressure vessels, treadplate, containers, and applications.  Alloy 5052 has a good marine atmosphere corrosion resistance of saltwater and excellent workability. Main features of this alloy include: non heat-treatable, excellent weldability, high corrosion resistance, smooth surface, lightweight, high-tensile strength.

Extruded bars/rods from 5052 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 5052 H112 Temper round bars are offered in different diameters 6 mm (15/64'') -300 mm (11-13/16") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AVIATIONEU NEW ERA 5052...

AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. It is  frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and other equipment, pressure vessels, treadplate, containers, and applications.  Alloy 5052 has a good marine atmosphere corrosion resistance of saltwater and excellent workability. Main features of this alloy include: non heat-treatable, excellent weldability, high corrosion resistance, smooth surface, lightweight, high-tensile strength.

Extruded bars/rods from 5052 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 5052 H112 Temper square bars are offered in different dimensions 5 mm × 5 mm (13/64" x 13/64") up to 150 mm × 150 mm (5-29/32" x 5-29/32") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AVIATIONEU NEW ERA 5052...

AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. It is  frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and other equipment, pressure vessels, treadplate, containers, and applications.  Alloy 5052 has a good marine atmosphere corrosion resistance of saltwater and excellent workability. Main features of this alloy include: non heat-treatable, excellent weldability, high corrosion resistance, smooth surface, lightweight, high-tensile strength.

Extruded bars/rods from 5052 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 5052 H112 Temper rectangular bars are offered in different dimensions 3.0 mm (1/8') -100 mm (3-15/16") × 10 mm (25/64") -300 mm (11 13/16") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AVIATIONEU NEW ERA 5052...

AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. It is  frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and other equipment, pressure vessels, treadplate, containers, and applications.  Alloy 5052 has a good marine atmosphere corrosion resistance of saltwater and excellent workability. Main features of this alloy include: non heat-treatable, excellent weldability, high corrosion resistance, smooth surface, lightweight, high-tensile strength.

Extruded bars/rods from 5052 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers.

AVIATIONEU NEW ERA Aluminum 5052 H32 Temper round bars/rods are non-heat treatable, weldable, highly resistant to corrosion, used for marine, chemical and petrochemical applications. They are hardened by cold work and have good forming characteristics and corrosion resistance, including resistance to salt water. Although easily welded, they are not recommended for brazing and soldering applications. Main features of these bars/rods include their corrosion resistance, particularly in marine applications, adaptability to most mechanical and finishing processes although the heavier anodic films may take on a yellowish cast as well as fair machining with the proper set-up. They are offered in different thicknesses, widths and pre cut lengths in inches.

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.